ScootDawg Forums

ScootDawg Forums (http://www.scootdawg.net/index.php)
-   50cc - 124cc (http://www.scootdawg.net/forumdisplay.php?f=24)
-   -   new pipe (http://www.scootdawg.net/showthread.php?t=54319)

dwint51 06-09-2014 12:22 PM

new pipe
 
the scooter mechanic here said my scooter doesn't have any restrictions even the pipe.im wondering since I only have maybe 5h.p on my 2t would a pipe and filter do much.it does 42 now and 7000 rpm at 40

Firehawk989 06-10-2014 01:57 AM

If you want more speed than that you need to get a BBK and a pipe, and probably a bigger carb, but then you'll need to re-tune the transmission because the pipe will shift the powerband way up in the RPM range. However, once you get it sorted out, you're looking at more like 50mph+ all-out, and an easy cruise at 40-45. You can also change the gears in your transmission for the highest possible top speed.

dwint51 06-10-2014 03:40 AM

sounds like a plan but I need to figure out the right combo.cant I go with just a bigger main jet instead of a bigger carb?i keep hearing different advice

Firehawk989 06-11-2014 07:25 PM

Quote:

Originally Posted by dwint51 (Post 527847)
sounds like a plan but I need to figure out the right combo.cant I go with just a bigger main jet instead of a bigger carb?i keep hearing different advice

Yea it depends on the size of the carb, if it's a 14mm or larger you can just get a bigger main jet. (Around an 84 usually.) If you do decide to upgrade the carb, go with a 17.5mm.

dwint51 06-11-2014 08:49 PM

I thought stock had 18.how can I tell what I have

Firehawk989 06-13-2014 07:07 PM

Quote:

Originally Posted by dwint51 (Post 527886)
I thought stock had 18.how can I tell what I have

Measure the width of the smallest part of the carb throat where the slide is.

dwint51 06-13-2014 08:11 PM

ok thanks


All times are GMT -4. The time now is 04:33 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.