first true 50mm ive seen
2 Attachment(s)
I got my kit in today from ebay scooter-parts 1 its a true 50mm kit all the others have been 48mm downside the head doesn't have the bigger valves like 02starider and robotechlegacy's kits have. So i won't be running the 24mm carb with it, not sure i will run the exhaust either. The mod on the roketa has begun i'll update when done.
|
The kit from starrider was a 50mm that I got, I didnt notice bigger valves tho just a different style head I thought. I have one of the heads here also Ill go look.
|
You want to sell or trade heads? starriders piston was 49mm i believe.
|
My head looks the same as the one in the picture. I just got another head from starider.
Ill upload the pic to photobucket in a sec, but its going to look just like yours. |
The ones i done from starrider and robotech the valves measured bigger by a few mm. The 50mm heads that is.
|
1 Attachment(s)
staridder piston its short by a few mm
|
Id have to tear that engine back apart but mine measured 50mm to the T. I always check everything from ring gap to crank run out when I rebuild.
http://i1305.photobucket.com/albums/...pseb33aebe.jpg http://i1305.photobucket.com/albums/...ps2a43f35d.jpg http://i1305.photobucket.com/albums/...psa1cd4fba.jpg |
The head needs to be planed in my opinion from starider. Theres more imperfections in the casting than most kits.
|
If youre coming up to St Louis anytime soon Ill give you another 50mm head from starider that I took off in place of a hoca head, the guy ran it maybe for 3-400 miles. Ill be leaving for Montana on a plant observation on Sunday to next Thursday but I can always leave it somewhere or give it to someone you know here in St Louis.
|
the valves look bigger on yours, the head i just got has 18/16 valves.
|
1 Attachment(s)
compare the pics
|
Ill get out my good ol measurin stick later on
|
the valves probably are at least 19mm, i'm not going to attempt to run a 24mm carb with the small valves.
|
i got same kit mine is 50mm and doin great
|
1 Attachment(s)
http://www.scootdawg.net/attachment....1&d=1360013294
now lets get real..you say hoca and ebay stuff is the only place that has a true 50mm head.....now this is a TRUE performance head big valves-3-angle valve seats-port by hand- detailed bowl porting-profiling. trust me when i tell ya this is the only true performance head out there... that stuff you got there is nothing on this.........buford |
All times are GMT -4. The time now is 06:59 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.