auto enrichener
 

I replaced my enrichener and still no high idle at start up.would this be electrical problem?

for some reason it is faster now

No sounds like an air fuel mixture problem or a jet issue.

I cleaned the carb.i have a good tan plug and its running better than ever.i just went up a hill at 22 and usually 15.i don't get it but it needs to be fixed before the cold weather comes

Most people wouldn't be complaining! But OK if I get what your saying you yhijkvthe scooter is over working itself, the way this happens is usually running to lean (to much air) take a look at your spark plug if its whiteish (as opposed to gray to brown or charcoal) you may be running lean.

looks tan to me.where do the wires go that the enrichener plugs into?is it a 12 volt hot wire.when I first start it it smokes then stops when warm.that would make me think its working

You can try unplugging the enricher. I really don't know where it goes, I assumed it goes to the CDI though. There are a few wiring diagrams for gy6 online (do a google search).

I still don't get what exactly your issue is though.

I guess I don't have any issues except I hate when things don't work the way they are suppose to

What are you wanting it to do?

give a high idle till its warm so I don't have to hold the throttle.i paid for a new one I expect it to work

Have you tried turning in the screw attached to the throttle cable a little? the one that the linkage rests against and holds the idle?

ill try it a little more