Question: How to fix problem:
1 Attachment(s)
Here is pic of what my carb looks like, notice the part of carb that would connect to air box, my problem is that I don't have much there for the clamp to hold on to. Any of you Dawgs have any ideas? I'm lucky if I have hsalf the clamp holding the hose on here.
|
I had no idea this was a problem... :S I have the same thing going on where if I tighten my filter on too tight it will just come right off, and as it is all it would take is a good bumb or small yank for it to come loose. I thought that's just how the carbs came.
|
It is a poor set up, when mine is starting cut out (yep air box clamp coming loose) I just think there must be a salution to this problem.
|
Use a wire hose clamp like this one and hold the 2 wires together when you tighten it.. :tup:
http://store.workshopsupply.com/cata...ages/13018.jpg |
Hey thanks scooterwayne,
|
All times are GMT -4. The time now is 06:55 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.