ScootDawg Forums

ScootDawg Forums (http://www.scootdawg.net/index.php)
-   50cc - 124cc (http://www.scootdawg.net/forumdisplay.php?f=24)
-   -   low beams tail light and auto choke don't work (http://www.scootdawg.net/showthread.php?t=54367)

Red9654 06-24-2014 07:00 PM

low beams tail light and auto choke don't work
 
i have a 2014 wolf rx 50. this morning i turned it on and 1 second after it started the low beams, side lights and tail lights went out. i also noticed the auto choke did not shut off after warming up. i flipped the switch for the high/low beams to turn on the high beams and when i did the high beams, side lights and tail light came on. also the auto choke shut off. so i had to ride to school at 530 this morning with the high beams on. when i got home i checked all voltages and they were good at all wires one connectors and they all have continuity. but still only the high beams work. i also noticed when i had the 9 pin plug unplugged by the buttons on the handle bar the side lights would come on but not the head lights. any ideas? i need to fix this asap as this is my only ride to school. thanks!

nightriderrv 06-29-2014 01:13 PM

Check the fuses and that connector to make sure there is no pins pushed out.

blueboy5000 07-01-2014 07:47 AM

Check your main fuse wire (primary circuit).

Also check ALL frame grounds.

hkpotts44 07-03-2014 03:05 PM

I'm with Blueboy it sounds like a fuse or a ground. In all of the ones I've messed with a faulty ground was the cause.

Red9654 07-05-2014 11:32 AM

it turned out to be a short to ground inside the lightbulb (headlight). i never gave that any thought because i saw the filament was good. that caused all voltage to short to ground. thanks for the help though

Bvance554 07-06-2014 01:46 AM

Off topic, but I always ride with my high beams on.

shadog37 02-06-2016 08:07 AM

Hell. You should ALWAYS RIDE WITH HIGH BEAM ON. Its safer and you can see those peskY 'POT' holes. Safe scootin to all


All times are GMT -4. The time now is 06:50 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.