ScootDawg Forums

ScootDawg Forums (http://www.scootdawg.net/index.php)
-   125cc - 249cc (http://www.scootdawg.net/forumdisplay.php?f=25)
-   -   correct jet size (http://www.scootdawg.net/showthread.php?t=56808)

donk 11-08-2023 08:45 AM

correct jet size
 
Hi Everyone,

I've just upgraded my air filter on a sukida 125cc (pretty sure its a lexmoto scoot with a different skirt on) with a nibbi pipe and 40mm filter on a 24mm stock carburettor.
I already have a performance exhaust so I guess upping the jet is the next logical step.
The stock jet is a 101, so my question is, to what size can I upsize too?
I was thinking 110-115 but would that be too large a jump?
Im at sea level with a few small hills around so not exactly mountain terrain.
The rollers are stock at 13grms but the clutch has been swapped out for the 1500rpm clutch.
I do intend to lower the rollers slightly for a faster takeoff in town traffic.
I hope I've done everything correct so far, any advice on the jets would be greatly appreciated!
Many thanks in advance

prodigit 04-21-2024 11:01 PM

Can't help you, but 110-115 looks like for a larger bike.
Usually you'd start with the idle jet, and work your way up to the main jet.
Here's a video that might help:

https://youtu.be/rCo6dJAxi64?si=FxJdg_TFf8runmWW


All times are GMT -4. The time now is 07:34 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.