new guy/lots of questions
sup dudes, names ivan. i recently just bought a taotao bws for myself and a ssr metro for my girlfriend.
i got some questions about the engines. tao tao has a 150cc gy6? 157qmj? and the Metro says it has a 150cc engine but its a 152qmi?? thats a 125cc model? are they all just different sizes of the base gy6 engine? did i get that right??? other than that - what kinda plug would you run of each of those engines? (i dunno if they need to be different, heard some people use NGK CR7), and what weight gear oil? any other knowledge you guys can drop on me would be great. i pretty much dont know anything about these. i just wanted one to put around town on nice days. thanks |
http://en.wikipedia.org/wiki/GY6_engine
This engines comes in lot of scooters and go carts. Stock sizes range from 50cc to 150cc but it can be modded all the way up to 200cc with lots of major case work. |
Quote:
what about the other questions? Also, what grade fuel do you guys run? Do these over heat ever? And what's this about adding or removing weight or something? What's all that about |
Assuming they're both new, most Gy6 engines recommended use 10W40 breaking in period first 500-1000 miles and some others switch to a synthetic. I didn't switch, and stuck with Mobil1 10W40 oil on all my scooters, but that's me…also you should do a full PDI inspection of both scooters new or used. and change all fluids. The plug is right or you could go to a iridium plug w/a orange wire coil, and orange cdi for longer/better starting performance and hotter spark, I have 4000miles on them and scoot starts first time all the time
The 157QMJ is a 150cc engine Check the engine casing by the vin# and the #152QMI Did you get a manual for each scoot nu or used?lol savy Enjoy, and lots of luck on your buys,Ivan |
On Mine my air cleaner was under the seat and would suck in super heated air and over heat (Summer here run in the 110f to 120f ranges at times) so I got an after market air cleaner and relocated it to the side beyond the body
http://www.scootdawg.net/picture.php...&pictureid=531 http://www.scootdawg.net/picture.php...&pictureid=530 This stopped my overheating issues |
Sup dude. I'd run the spark plug that came in it unless it was defective. Contrary to belief an NGK spark plug is not an 'upgrade' over a perfectly functioning spark plug of a different make.
|
"Sup dude. I'd run the spark plug that came in it unless it was defective. Contrary to belief an NGK spark plug is not an 'upgrade' over a perfectly functioning spark plug of a different make."
How about an IMO with that statement? Its common knowledge that nearly everyone changes out to an NGK and most of them an irridium. Much better reliability, starting and power...IJAEO (in just about everyones opinion) |
Quote:
|
gy6 bikes use NGKC7HSA plug.
|
Sooo got the scoots and put the gfs together and rode a bit. Lots of smoke coming off the exhaust. ..This normal? Looks like the rubber rings are melting once things heat up? What's the deal?
|
As long as it's coming off the exhaust that's only annoying, not harmful. Where are the rubber rings? I don't know of any near the exhaust.
|
Quote:
BTW, is that radiator hose? |
All times are GMT -4. The time now is 11:12 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.