Quote:
Originally Posted by blueboy5000
Usually, the bearing doesn't fail. It's more likely to be sheered-off teeth on the final drive spline/axle.
The bearing is usually included with a final drive gear set kit.
|
Well I took it apart, and you are correct the bearings appear to be fine, but also no teeth appear to be damaged ..
Now here is the strange thing , I put in the main shaft, the one going to the clutch, and it grinds , it is the only thing in it seems to grind when I turn it by hand ..
But when I pull it out, the bearing spins fine makes no noise and looks fine ..
I am confused ...