View Single Post
Old 11-13-2013, 05:55 PM   #8
Lefty   Lefty is offline
 
Lefty's Avatar
 
Join Date: Jan 2013
Location: midwest
Posts: 93
It sounds good, as for the valves sure you can try .002 on the Intake and .005 on the exhaust. Some folks set the exhaust to .005 so that it lasts a little longer before the next valve adjustment is needed. But IF it CLATTERS then bring it down you do not want the rockers slapping coming off the lobe of the cam. Ticking valves are fine that tells you they are not tight and not to loose.

I saw that the belt climbed near the edge of the Variator so that seems fine. Did you say it has a #88 MAIN JET in there? That is to big of a main jet for just a uni on it. Usually an #88 is needed when you put in like a 72cc BIG BORE KIT.

Try this ride it and when you get to where it doesn't want to go anymore BACK OFF the throttle about 1/4 of an INCH and hold it there.
Now pay attention to what the scooter does.
A. Does it pick up a little speed
B. Does it just settle down
Lefty
__________________

Three Wheels keep me up
You’ll never be old and wise if you weren’t young and crazy
  Reply With Quote