BBK Issues
Hello, new to the forms so let me introduce. I have 2 scooters a 150cc johnway and a 50cc bintelli scorch both were non functional when purchaced and with help from this form I have got the 150 running great.
The bintelli 50cc is a bike I am working on for my wife. At stock it seized, was able to free it, but began burning engine oil (seize originally from low oil possibly not filled at the shop I bought it). Bought a 60cc bbk to replace what i assumed were blown rings and piston and installation went smooth. When I rock the flywheel l around top dead center I get a clang, possen the 6 bolts holding down the jug and the flywheel spinns smoothly no clang.
Right now I have it all bolted down and valves set to 0.005 and I can get it to run but the clanging repreates at every rotation of the engine. No idea what is going on.
I tore it down (top end) and re went through the steps get to the end again and same thing, I can't leave the top end unsecured but the clang I here and feel can not be good. Its almost like I need anothrr couple mm of space in the top end ( but everything both gaskets are installed)
Thanks!
- Carl
|