1-Turn mixture screw CLOCKWISE until it STOPS TURNING.
then
2-Turn mixture screw COUNTERCLOCKWISE 2 complete turns.
3-Start bike. (It may be necessary to adjust IDLE SCREW. to obtain useable idle.) Allow TEN MINUTES of running
4- turn MIXTURE SCREW COUNTERCLOCKWISE in 1/8 turns incremets until your RPMS reach MAXIMUM. then turn MIXTURE SCREW 1/4 turn CLOCKWISE. This is proper mixture setting.
5-Adjust idle screw until IDLE RPM is at 1800-2000 rpms.
__________________
2011 Roketa MC-23-150
4T 150cc 157 qmj
24mm carb w 115 main jet and paper cone air filter
Manual petcock w Tygon fuel lines
Scrappy Dog Scooters Retro-slash stainless straight-thru exhaust
RED spring clutch
Adjustable CDI (brand unknown, it's blue and red and works great!)
KOSO high performance variator w 12g sliders
Gates Powerlink 835-20-30 belt
GPS verified 65mph on flats.
|