Quote:
Originally Posted by dirtrider1219
Hello everyone I just joined and this is my first post. I am a huge scooter fanatic on the quest for more power  The problem is I have a 1p52qmi. I know the 1p52's (125cc) and the 1p57's (150cc) are the same besides the cylinder. All the reading I've done says that the difference with the p is in the head. Well if I buy this kit, won't it work since it basically replaces everything from the bottom up?
http://www.ebay.com/itm/SCOOTER-150C...RTqXpj&vxp=mtr
Also, he says that it does not require a spacer. A +6mm stroke is alot to have no spacer no? Is all of that clearance cut out of the piston? The guy's feedback isn't too great so I'm a little weary  |
I'm far from a scooter expert but an engine is an engine! A spacer might put you back to where you are now! A spacer might be defeating the purpose of the kit! Plan on high compression. I won't go thru the whole process of what I used to do when I "souped up" engines for motorcycles but you should be able to measure!
Irish
