Thread: Still no spark
View Single Post
Old 06-11-2017, 08:29 PM   #9
Roscoe   Roscoe is offline
 
Join Date: Nov 2016
Location: N. of Texas and S. of Kansas
Posts: 252
I'm not sure if we're allowed to post links but if we are, try following this... https://www.buggydepot.com/tech-cent...uide-no-spark/ it has the voltages needed at test points on the ignition system, multimeter set on AC
  1. There should be between 20vAC ~ 100vAC coming from the CDI power wire (Black/Red), although much lower voltages will still be able to produce spark.
  2. There should be at least 0.05vAC coming from the trigger wire (Blue/Yellow).
  3. CDI output at least 18 Volts AC
  4. if the link posted I'm just repeating what they had...
  Reply With Quote