[QUOTE=CTscoot;537323]
Quote:
Originally Posted by casey360360
Who manufacures the engine? From what I can find those came with either the Linhai VOG250 or the Honda Helix 244 clone, I can't find much on them that being said.
Hi casey360360,
As I understand it's the Honda Helix 244 Clone.
Regards
Ctscoot
|
Disclaimer, I'm not familiar with Honda's electronics in their scooters. I'm going off of my work with Suzuki and Yamaha and their clones. Take what I say with a grain of salt, as it's better than nothing but not as good as a professional's word. I'm an Automotive tech, not a motorcycle tech.
With what you're describing I would start by inspecting the CDI module, it should be the 2 plug I think 8 pin style. Honestly, you can get a performance replacement coil, CDI and plug for $15 on Amazon, just search Honda CN250 performance CDI, it may be worth it to just replace them and see if that fixes the problem. Worst case is you have spares now. I suggest this because (in my experience with other scooters) the CDI controls the auto choke, when the CDI starts failing you'll experience issues with the auto choke and/or spark advanced. I have a very similar issue with my Linhai, the CDI failed and I replaced it with the wrong one, the spark advanced causes late and pre detonation as well as it doesn't actuate the choke.
Sent from my LGL158VL using Tapatalk