|
On a 150cc it's best to set the intake at .004 inches and the exhaust at .005 inches. On a 50cc the stock setting is .002 inches but the hot setup is .003 inches.
If your valves sound loud at .005 inches it could be a slight mistake happened. I usually set the valves to clearance then rotate the engine until you're back at compression again and check them. I've found a slight difference from what I thought I set them at doing that. It's a good check.
__________________
2008 Eagle Milano 150- 9,679 miles
2009 Honda Rebel 250- 10,434 miles
2009 CF Moto Fashion- 16,023 miles
2009 MC-114 50cc Cub Clone- 4,317 miles
twowheeler.yolasite.com/
That's 30,049 China Scootin miles and Counting.
|