View Single Post
Old 05-22-2017, 03:24 PM   #1
Heedehcheenuh   Heedehcheenuh is offline
 
Heedehcheenuh's Avatar
 
Join Date: May 2017
Location: McColl South Carolina USA
Posts: 32
Tao Tao Powermax VIP 150cc 157QMJ ready to roll

POWER TRAIN
Engine Air-cooled single-cylinder four-stroke
Displacement 150cc
Horsepower 10HP
Speed 55+
Starter Electric/Kick
Ignition C.D.I
Transmission Automatic
DIMENSIONS
Overall Length 73in
Overall Width 26in
Overall Height 44in

Wheelbase 52.8in
Net Weight 295lbs
BRAKES & TIRES
Brakes Front Disc
Brakes Rear Drum
Tires Front 120/70-12
Tires Rear 120/70-12
OTHER
Battery Type
12V





New here and just getting started on my Powermax. I want to beable to run 55-65 mph up hill (small grades) and not be a rolling road block. So far she gets up to 53-55 mph (GPS) and she is still new. I am trying to stay away from motor mods until overhaul time. I will do the new belt (Gates) I have changed oil with Rotella dyno oil 15/40 and gear oil with 75/90 Valvoline. Synthetic oil for both after break in. I put the NGK plug in.
Currently she runs:
2500-3000 rpm for take off
4000-5000 rpm for 25-35 mph (GPS)
8000-9000 rpm for 50-60 mph (GPS)
My 60 mph run was done tucked and grinning lol.
I am looking into doing the 15-16-17/36 gear change to put the motor in the sweet spot running 50-60 mph not tached out. Then I can adjust variator rollers/sliders to move the power band around for what I need. I am not interested in the fast take off in as much the med to top end ride. Any wind screen/shields out any good? I can make the angle just right to flow air/wind over instead of air/wind hitting a wall while riding.
So far so good though..she runs good and rides fair. ??? Shocks??

Chime in and feed the brain for the build,
Heedehcheenuh
Chuck D
Ride on.....
__________________
2015 Honda PCX150 Metallica Black



Login or Register to Remove Ads
  Reply With Quote