|
10-06-2018, 04:33 AM | #1 |
Join Date: Aug 2018
Posts: 7
|
clutch o-rings???
So I was breaking belts...Took apart the clutch--over the course of about an hour I managed to pry off the cover which houses the pins; it was so full of belt debris it would not just slide off. I ruined the o-ring at the top that is supposed to keep the debris out, though I suspect it wasn't doing its job anyway. Does anyone know what size o-ring I should get to replace it? Its a 150cc gy6 scoot.
Last edited by vs7; 10-06-2018 at 01:40 PM. |
10-06-2018, 01:25 PM | #2 |
Join Date: Aug 2018
Posts: 7
|
I am wondering if most people run the stock clutch and, if so, do you often find yourself cleaning it?
|
10-06-2018, 02:12 PM | #4 |
Join Date: Aug 2018
Posts: 7
|
So to sum up all my ramblings on, I am trying to find a quality replacement for number 15 (o-rings) for a 150cc clutch |
|
|