|
03-10-2014, 07:56 PM | #1 |
Join Date: Mar 2014
Location: Morganton NC
Posts: 47
|
Rear end bearings
I bought a shanghai shenke two days ago, test road it and it was spitting like crazy, bought it anyway. Turned out to be a sparkplug wire, (simple enough) after a short ride I noticed the bearings in the back didn't sounds so good, I decided to go home and check the gear oil (should have done that first) well about 1 mile from home the bearings came apart, locked the gears and the instant stop shattered my wheel. turns out there wasn't a single drop of gear oil in it... I want to replace all the bearings and the cover (for good measure) I saw 5 bearings I need to replace, any more? Any one know a good place to get them all cheap? Also gonna need another 10" rim if anyone has one laying around for a short case motor they wanna sell...
Thanks, Daniel |
03-10-2014, 07:57 PM | #2 |
Join Date: Mar 2014
Location: Morganton NC
Posts: 47
|
Guess I shoulda mentioned this was a 150cc 157qmj
|
03-10-2014, 10:27 PM | #3 |
Join Date: Feb 2014
Location: Arizona
Posts: 79
|
Your best bet is scrappydogscooters.com they have pretty much everything possable. I can't seem to buy anything online so I just call them and tell them what I need they are very helpful. There business hours kinda suck is the only downside open at 8 or 9 am and close at 3pm. They are based out of Las Vegas, Nevada. Mountain time.
|
03-10-2014, 10:53 PM | #4 |
Join Date: Mar 2014
Location: Morganton NC
Posts: 47
|
I've bought from them before, but I couldn't find bearings... They have some great prices tho. I really need to call them up. I don't think I saw a 10" rim either. I'm gonna check again
|
03-11-2014, 08:31 PM | #5 |
Join Date: Feb 2014
Posts: 105
|
If you can't find them and have just one good one left you can call a bearing place and they'll make them. Here in central Tx we use Capitol Bearing in San Antonio. That may not help you wherever you're at but you get my drift.
|
03-13-2014, 10:51 AM | #6 |
Join Date: Mar 2014
Location: Morganton NC
Posts: 47
|
Scrappy dog is assisting me in getting the bearings I need thanks guys. You can close the thread now.
Thanks Daniel |
|
|