|
06-07-2014, 08:51 AM | #1 |
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
|
different clutches
thinking about buying a new clutch for my jonway 2t.i heard there is different types.went on ebay but they just say will fit most Chinese scooters.mine has three pads not two if that helps
|
06-08-2014, 01:25 PM | #2 |
Join Date: Feb 2014
Location: las vegas
Posts: 100
|
The Chinese aftermarket clutches are worthless, the clutch bells are nice but the clutch shoes themselves are horrible, if you get a performance clutch shoe and remove the 3 shoes and weigh them, they will all be different, sometimes 10g off. If you want a clutch go with hoca or ncy, something Taiwanese. You get what you pay for
|
06-08-2014, 05:45 PM | #3 |
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
|
reason im asking is one of my pads came off and only 550 miles.i glued it back on with gorilla two part epoxy and so far 30 miles its good but I don't want to ride far or have the rear wheel lock up on me
|
06-08-2014, 05:59 PM | #4 | |
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
|
Quote:
|
|
06-09-2014, 08:24 AM | #5 |
Join Date: Jul 2011
Location: Connecticut
Posts: 493
|
That clutch will come with 1k springs and 2k springs. Use the RED springs.
The stiffer springs will not actuate until 2k RPMS, and will give you a noticeably better "launch".
__________________
2011 Roketa MC-23-150 4T 150cc 157 qmj 24mm carb w 115 main jet and paper cone air filter Manual petcock w Tygon fuel lines Scrappy Dog Scooters Retro-slash stainless straight-thru exhaust RED spring clutch Adjustable CDI (brand unknown, it's blue and red and works great!) KOSO high performance variator w 12g sliders Gates Powerlink 835-20-30 belt GPS verified 65mph on flats. |
06-09-2014, 08:25 AM | #6 |
Join Date: Jul 2011
Location: Connecticut
Posts: 493
|
also;|
STOP RIDING ON THAT GORILLA-GLUED CLUTCH!!!!
__________________
2011 Roketa MC-23-150 4T 150cc 157 qmj 24mm carb w 115 main jet and paper cone air filter Manual petcock w Tygon fuel lines Scrappy Dog Scooters Retro-slash stainless straight-thru exhaust RED spring clutch Adjustable CDI (brand unknown, it's blue and red and works great!) KOSO high performance variator w 12g sliders Gates Powerlink 835-20-30 belt GPS verified 65mph on flats. |
06-09-2014, 09:25 AM | #7 |
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
|
when mine is on the center stand the rear wheel moves at 2000 rpms so im guessing mine are 2000 stock?
|
06-10-2014, 01:59 AM | #8 |
Join Date: Mar 2013
Location: Vancouver, BC
Posts: 198
|
2k springs means it will engage 2k higher than the stock ones, so they should engage around 4k.
__________________
2005 Yamaha BWS (Zuma) "Garfield" TP Black Trophy 70cc, Giannelli Reverse Pipe, 5g Dr. Pulley Sliders, Delta Clutch with Yellow Springs and Yellow Contra, Malossi Torque Controller, Naraku R-Vent Bell, NCY Adjustable Secondary Sliding Sheave, CF Reeds, Kege Analog Tach, Dual Headlight Mod, N.A. Rear Fender Delete, OEM Short Windshield. |
06-10-2014, 03:37 AM | #9 |
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
|
I like mine the way it is.do they all come color coded even stock ones?if so ill just keep the ones I have and put them on the new one since I have less than 600 miles.my scoot came with a gates belt stock.thats not bad for chinese
|
|
|