![]() |
|
![]() |
#1 |
![]() Join Date: Apr 2006
Location: South Haven Michigan
Posts: 225
|
A matter of the Stator..
I have a matter of the Stator.. My Adly 2 stroke 50 has a 6 coil stator. 5 bronze ones + the one exciter coil for a total of 6. Every stator I see has 6 bronze coils + 1 exciter coil for a total of 7. The Adly (expensive) site itself shows the stator as a total of 7 coils in the diagram..but when you click on it's part number the pic it shows has a total of 6 coils. Will the 6+1 type work with my 5+1 original? I have never seen a Minarelli engine that only had a 6 coil except this one....being 5 + 1 exciter coil...vs. the 7 coil which are 6 bronze wound + 1 exciter coil. The yellow wire on mine is dead and has zero output for battery charging etc. The white wire has the normal 18-24vac. This has me confused and wonder if the 7 coil will work with what I have
![]() ![]() |
![]() |
![]() |
#2 |
![]() Join Date: Apr 2006
Location: South Haven Michigan
Posts: 225
|
Slow down...I can't keep up with all this input..lol..
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Apr 2006
Location: South Haven Michigan
Posts: 225
|
Thanks for the input.. Wait..there was none..lol.. Anyway I got it resolved and made an important discovery that will save folks well over $100.00 on those so called 'Proprietary' Stators.. You can read about it here..just don't get these things on the market before I build a few more and do the same..
![]() Glenn The link.. All the important info..documentation and pics are on page 2 of this thread.. http://49ccscoot.proboards.com/threa.../matter-stator ![]() |
![]() |
![]() |
#4 |
![]() Join Date: Aug 2013
Location: N Carolina
Posts: 453
|
Thanks for the link. I'm not good with stuff like that. GY6es are hard enough for me, so I was hoping for an answer, also...
|
![]() |
![]() |
#5 | |
![]() Join Date: Apr 2006
Location: South Haven Michigan
Posts: 225
|
Quote:
![]() |
|
![]() |
![]() |
#6 |
![]() Join Date: Aug 2013
Location: N Carolina
Posts: 453
|
No, I didn't know the answer for your problem, so I'm glad you posted what you found out. I am glad you got your stator figured out and filled us in...
|
![]() |
![]() |
|
|