|
|
03-22-2014, 09:36 PM | #1 |
Join Date: Mar 2014
Location: Morganton NC
Posts: 47
|
Petcock ignorance.
How exactly does the in tank Petcock mount up? I was doing my short case to long case swap and bumped the Petcock and it started leaking. Turns out the previous owner used jb weld to sloppily mount it to the tank. There is just a hole where it was..
Can't seem to get a picture on here either... |
03-23-2014, 04:38 PM | #2 |
Join Date: Mar 2014
Posts: 4
|
petcock
They mostly look like this if its mounted into the tank. They screw on from the bottom and open with vacuum. Then gravity does the rest.
|
03-24-2014, 04:07 PM | #4 |
Join Date: Mar 2013
Location: illinois
Posts: 65
|
Sorry to say ,it might be time for a new tank.
Unless you feel comfortable jb welding back on again. |
03-28-2014, 06:08 PM | #6 |
Join Date: Mar 2014
Location: Morganton NC
Posts: 47
|
Anyone know?
Is the short one fuel? And long vacuum, or the other way around. |
03-29-2014, 08:52 AM | #7 |
Join Date: Mar 2014
Posts: 4
|
vacume
The vacume is the short nipple.
|
03-29-2014, 02:13 PM | #8 |
Join Date: Mar 2014
Location: Morganton NC
Posts: 47
|
Thank you
|
|
|