|
|
|
|
|
06-03-2022, 03:51 PM
|
#1 |
 Join Date: Jun 2022
Posts: 5
|
Differential oil/grease
From what I have read, there is a common issue with the differential fluid not being good enough, big surprise, and tends to leak from the rear end. I am wanting to add some to it but not sure what exactly to use. Any suggestions?
__________________
2014 Icebear Q6 PST150-17
I'll be more than happy to teach you the wrong way to do something. |
|
|
06-06-2022, 10:07 AM
|
#2 |
 Join Date: May 2017
Location: Norfolk, VA
Posts: 609
|
If you have a leak at the reduction box (behind the torque driver) you either have a failing seal(s), missing screw and/or cracked cover. Find the leak and fix it. As far as oil in there most scooters call for 80-90 Hypoid oil. I use Honda brand. On modded Zuma 2-strokes I use 10-30 synthetic motor oil.
The amount should be cast into the case, usually around 110cc. |
|
|
|
06-06-2022, 03:33 PM
|
#3 |
|
Join Date: Jun 2022
Posts: 5
|
Thanks I'll give it a look. I added some high temp grease yesterday. It took a good amount of pumps from the grease gun. We'll see how this works smh. The way this is going it might end up being cheaper to drive my diesel lol.
__________________
2014 Icebear Q6 PST150-17
I'll be more than happy to teach you the wrong way to do something. |
|
|
|
06-06-2022, 09:14 PM
|
#4 |
|
Join Date: May 2017
Location: Norfolk, VA
Posts: 609
|
Using that grease is not recommended. I had a Honda Helix blow a seal on the reduction box wheel side, coating the rear wheel with oil. So to get home I packed the reduction box with axel grease. I got it home but it was nasty to clean up and i still had to replace all 3 bearings.
|
|
|
 |
|
|
Hybrid Mode
