Brake light not working.

Mäwby · 04-19-2018, 11:49 AM

My brake light and tail light are in the same bulb. However, when I pull the brakes, the brake light doesn't come on. Is there a fuse somewhere I need to check or is it something else going on? Please help!

I have a Tao Tao Lancer 150.

tromper · 05-28-2018, 10:14 PM

Did you get this resolved?
If not have you tried a new bulb? Beyond that you're checking wiring and switches, which are sadly likely on a Chinese scoot, but happily cheap and easy to replace if necessary.
Sometimes the switch just needs to be moved a tetch, ran into that on my HD.

Roscoe · 05-29-2018, 01:23 PM

Yep, lots of wiring diagrams on the internet. Chase the problem down and don't forget to check the ground (called earth in some countries).

Warbird616 · 10-02-2018, 11:49 AM

Usually it is the switch right there on the brake handle, that click sound ya hear. Check it for continuity.

05-28-2018, 10:14 PM	#2
tromper Join Date: Oct 2011 Location: Seattleish Posts: 18	Did you get this resolved? If not have you tried a new bulb? Beyond that you're checking wiring and switches, which are sadly likely on a Chinese scoot, but happily cheap and easy to replace if necessary. Sometimes the switch just needs to be moved a tetch, ran into that on my HD. __________________ 2008 SYM HD200 "Indigo" 2007 Suzuki Burgman 650 "Ohanzee"
	0

10-02-2018, 11:49 AM	#4
Warbird616 Join Date: Oct 2018 Location: Kern County, California Posts: 2	Usually it is the switch right there on the brake handle, that click sound ya hear. Check it for continuity.
	0