|
|
|
|
|
09-16-2016, 09:23 AM
|
#1 |
 Join Date: Sep 2016
Posts: 6
|
Zhejiang 150cc spark issue
No spark.
Checked the ohms on the ignition coil at the two terminals. 0 ohms. secondary at plug without cap (which the wire was cut off anyways)..3.4 ohms. thinking the ignition coil has had it. Gonna replace the cdi box and coil and see if any spark is produced. if not..clearly is the strator. Where is a good source to buy all of these parts. its a 2008 Zhejiang 150cc scooter. |
|
|
09-16-2016, 02:37 PM
|
#2 |
Join Date: Jul 2016
Location: Lexington KY
Posts: 52
|
__________________
All about that lowered life #fear_of_heights |
|
|
|
09-18-2016, 06:11 AM
|
#4 |
 
Join Date: Jul 2011
Location: Connecticut
Posts: 493
|
A gy6 coil is usually mounted to a hard-point on the frame with a 10mm or 8mm bolt. It doesn't matter how you attach the two wires, you can attach them to either terminal(connector).
__________________
2011 Roketa MC-23-150 4T 150cc 157 qmj 24mm carb w 115 main jet and paper cone air filter Manual petcock w Tygon fuel lines Scrappy Dog Scooters Retro-slash stainless straight-thru exhaust RED spring clutch Adjustable CDI (brand unknown, it's blue and red and works great!) KOSO high performance variator w 12g sliders Gates Powerlink 835-20-30 belt GPS verified 65mph on flats. |
|
|
 |
|
|
Hybrid Mode
