|
|
09-06-2014, 06:05 PM | #1 |
Join Date: Sep 2014
Posts: 1
|
GY6 Solenoid/Electrical issue - 150cc Lance Vintage
I have a 150cc Lance Vintage (2008 model) that was powered by a DC CDI but the engine was shot. I replaced the motor with a 150 cc clone thats now AC powered and I've had to do some rewiring. I'm having issues with the starter solenoid now and have a video link below to let you hear the sounds its making. It was engaging/turning over the starter but now just makes this sound. The motor came with a new cdi, rectifier, solenoid, starter, and coil. The new AC CDI also fried when I first rewired it and was possibly due to a short or incorrect/hot gound. I have a new replacement AC CDI but now the solenoid problem. Any ideas on why the solenoid sounds this way when I crank it over? I can post images of my wiring if needed.
|
09-07-2014, 01:44 PM | #2 |
Join Date: Jul 2011
Location: Connecticut
Posts: 493
|
That solenoid is no good. When they start making that sound, they are on the way out.
__________________
2011 Roketa MC-23-150 4T 150cc 157 qmj 24mm carb w 115 main jet and paper cone air filter Manual petcock w Tygon fuel lines Scrappy Dog Scooters Retro-slash stainless straight-thru exhaust RED spring clutch Adjustable CDI (brand unknown, it's blue and red and works great!) KOSO high performance variator w 12g sliders Gates Powerlink 835-20-30 belt GPS verified 65mph on flats. |
Tags |
150cc, gy6, lance, lance vintage, solenoid |
|
|