|
03-01-2013, 05:02 PM | #1 |
Join Date: Aug 2011
Location: Tierra Azul, NM
Posts: 739
|
Stuff I don't need that you might FREE
Ok in the spirit of community. On a cycling forum I am on there is a thread were people give away stuff they don't need. That's right just give it away. For me it's a way to say I appreciate scootdawg and its members. So to be clear post stuff here you have laying around for your scoot that you just don't need at all that maybe someone else could use.
I have a set of 12 gram Dr. Pulley slider weights for a standard GY6 150, I want to give away for free. I got them for the Jonway and sold it before I installed them so they are brand spanking new. I will pay for the mailing too. (that's right they will go in the mail as slow as it goes.) If you want them fast you can send some dough I will overnight them if you like. No sellers here only those looking to pay it forward. I think its ok if you ask the receiver to pay the shipping but I'm not. First pm or reply gets them. Ready set .... go! Anyone else got stuff laying around they will never use?? Edeited title for clarity
__________________
Do not fear mistakes. You will know failure. Continue to reach out. - Benjamin Franklin Join the HARDCORE 1983 Honda GL650I SilverWing Last edited by scootnwinn; 03-03-2013 at 01:07 PM. |
03-01-2013, 05:04 PM | #2 |
Join Date: Aug 2011
Location: Tierra Azul, NM
Posts: 739
|
BTW please don't take them if you won't install them right away...
__________________
Do not fear mistakes. You will know failure. Continue to reach out. - Benjamin Franklin Join the HARDCORE 1983 Honda GL650I SilverWing |
03-01-2013, 05:06 PM | #4 |
Join Date: Aug 2011
Location: Tierra Azul, NM
Posts: 739
|
Glad you like it. It seemed good to me too makes for good karma all around
__________________
Do not fear mistakes. You will know failure. Continue to reach out. - Benjamin Franklin Join the HARDCORE 1983 Honda GL650I SilverWing |
03-05-2013, 08:41 PM | #7 |
Join Date: Oct 2011
Location: Cape Coral Florida
Posts: 3
|
i have 2 stock cams, 2 stock cylinders with pistons(about 200 miles each) if anyone wants them for shipping cost
|
03-05-2013, 09:45 PM | #8 |
Join Date: Jul 2012
Location: Miami, FL
Posts: 390
|
I have a blue CDI, 5 pin
(didn't fit my ATM50, which has the 4 + 2 pin setup, like below): Giving away for free is not an issue, just that, not really willing to pay excessive shipping fees. Any suggestions? USPS, with no tracking? |
03-05-2013, 09:49 PM | #9 |
Join Date: May 2012
Location: missouri
Posts: 164
|
I have a bunch of round rollers that came out of big bore kits i think they are all 8 grams
__________________
B.A.M.F. tapout scoot 24mm carb 150cc intake performance exhaust A9 cam hoca big valve head 16/50 gears 9.25 gram dr pulley sliders koso variator 1.5k torque spring orange coil orange unlimted cdi uni filter gates premium belt 2012 taotao vip cy50a scrappys 110cc big bore kit 52mm "88cc" 100 main jet 38 idle iridium plug custom paint, leds and decals alarm system naraku hd crankshaft |
03-05-2013, 09:55 PM | #10 |
Join Date: Jul 2012
Location: Miami, FL
Posts: 390
|
test sig
|
03-05-2013, 09:59 PM | #11 |
Join Date: Aug 2011
Location: Tierra Azul, NM
Posts: 739
|
digit did you just use the get stuff free stuff as a testing platform?
its working btw
__________________
Do not fear mistakes. You will know failure. Continue to reach out. - Benjamin Franklin Join the HARDCORE 1983 Honda GL650I SilverWing |
03-07-2013, 03:37 PM | #12 |
Join Date: Jan 2013
Location: pasadena, tx
Posts: 135
|
Ill take the rollers, pm me plz, I. Was trying to drill out my rollers to make em light but. It got hot and melted the rubber, :( also I will post a pic soon of stuff I got laying around
|
03-20-2013, 12:49 PM | #13 |
Join Date: Jan 2013
Location: pasadena, tx
Posts: 135
|
so I haven't had time to take any pics, but I do have an extra voltmeter up for grabs. It can help ya troubleshoot electrical issues on your scoot if they should arise. its nothing special, (harbor freight, $3-$7, or sometimes free with coupon). pm me if interested
|
04-18-2013, 04:48 PM | #14 |
Was just replying to 'renew' the thread.
I have quite a bit of things, from 50cc to 178cc, wieghts and wires to RRs and springs. If you come across something you want/need, ask here before you pay for it. It could save you some of that rare stuff called money. lol
__________________
2007 Sportiva Falcon GY6 150 4T 7,200+ Mi. 68 ( GPS Verified ) 76 MPG Few Mods, Lots-O-Tweaks 2003 Vento Zip R3i TurboCam 50cc 2T 8,500+ Mi. 62mph ( GPS Verified ) 90 MPG Seriously Modded Check out the new group for the Mountain Area! http://www.scootdawg.net/group.php?groupid=4 |
|
04-18-2013, 07:10 PM | #15 | |
Join Date: Sep 2011
Location: staunton va
Posts: 319
|
Quote:
__________________
2010 Cpi Oliver 70cc, naruku trans kit, downhill handle bars, tecnigas rsll pipe, s6 4g rollers, Vento R4 with 90cc 1e52qmf technigas next r 100cc pipe Naruku, 21mm race carb, s6 4.5 g rollers |
|
|
|