|
01-29-2013, 02:04 AM | #1 |
Join Date: Jan 2013
Location: Englewood, CO
Posts: 24
|
Toolkit addons - suggestions?
I know toolkits are good insurance. I already used my WD-40 to get out of a bind when my key wouldn't turn in the ignition after fueling up (by the way I have CorrosionX on order to fix that problem permanently!)
I need some help whittling down and beefing up my toolkit and spare parts on board my scooter. I have a 2012 Taotao ATM150-A 150cc. Here's what I've seen on scootdawg threads as possible addons to what I have already. Opinions on these items? Any other suggestions? Thanks for any advice. Items I've read about and am considering adding: impact driver 13" 1/2" drive breaker bar strap wrench wire crimping tool electrical: 16 gauge wire, butt connectors, quick connects, etc. feeler gauge tire repair kit bike pump spare bulbs spare fuel filter extra vacuum line and gas line spare regulator spare CDI box spare ignition coil spare throttle cable spare drive belt Here's what I have in my under-seat compartment so far. It seems kinda heavy. Any ideas on whittling it down? As it is now, the compartment is full with what I have listed. 1) FIRST AID KIT 2) RAIN JACKET/PANTS 3) BUNGEE CORD NET 4) TOOLKIT & SPARE PARTS: Currently weight: 13 lbs My tool bag is a kid's insulated 2-compartment lunch backpack (see photo) ----------------------------------------------------------- Mechanix gloves 2 rags in ziplock bags 0.2 oz green loctite 0.2 oz blue loctite 1.25 oz white lithium grease 0.5 oz graphite oil 3 oz WD-40 spray LED flash light small ziplock bag of extra fasteners M6, M8, screws, etc. roll of steel wire zip ties electrical tape duct tape teflon tape ----------------------------------------------------------- utility knife tire pressure gauges x2 needle nose pliers gerber 'suspension' multi-tool pliers channel lock pliers small vice grips wire cutters piece of coat hanger with hook-shaped end for grabbing wires bit driver set with various phillips tips, 1/4" drive tip phillips screwdrivers 4" x2 flathead screwdriver 6" flathead screwdriver 3" ----------------------------------------------------------- metric hex key set hex key for Motobatt battery terminals ----------------------------------------------------------- crescent/box wrenches: 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 17mm adjustable wrenches: 10", 8", 5" ----------------------------------------------------------- 3/8" drive ratchet 5/8" spark plug socket 2" extension 3/8" drive hex bits: 4mm, 5mm, 6mm, 7mm, 8mm, 10mm 3/8" drive sockets: 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 17mm ----------------------------------------------------------- 1/4" drive ratchet 1" extension 2" extension 3" extension 5" extension 1/4" drive sockets: 8mm, 10mm, 12mm, 13mm, 14mm 1/4" drive deep sockets: 8mm, 10mm, 12mm, 13mm ----------------------------------------------------------- 1/2" drive 21mm socket (1/2" drive torque wrench at home + 25" breaker bar at home) ----------------------------------------------------------- 2 spare fuses spare rubber dampers for trunk spare NGK CR7HSA (4549) spark plug |
|
|