Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 250cc +
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 02-06-2013, 09:19 PM   #1
ykdavid   ykdavid is offline
 
Join Date: Jan 2013
Posts: 8
Question My MC-13-250 has problems

Hey guys I told you guys some of you may remember I said I was getting a 250 that would shut off if the RPM's dropped below 2K. <-- well that deal went a way so I didn't get that scoot, but I still wanted one so I checked around and found an 07 Roketa BALI 250. It was kinda far off but I figured "what the hell" it runs so I could drive it home. <--DUMB anyways I get there the guy showed me the scoot every thing looked good it started up I test drove it down the street everything was fine. It was low priced at $700 I figured I'm getting a pretty good deal. So I buy it and start my ride home.

I went to the gas station down the street to fill up (premium gas)
I saw no problems.

next I got on the highway and got the scoot up to about 65mph and hung there. a little later I wanted to see how fast it would go so I got up to around 71-73ish.

A little after that the scoot died, it shut off while doing about 60mph and I coasted to a stop.

I sat for a second on the side of the road and thought maybe I flooded it or something.

I wanted to start it again so I held the break and hit the start button and it started after a try or two. when i pulled away "I noticed a lot of smoke coming form the muffler" I thought to myself that "if it continued I'd stop" but shortly after it stopped. So I rode on.

The scoot had me worried that I'd be stuck on side of the road. No one I knew had a truck to pick it up if it wouldn't run so I pressed on.

Next I started losing power "It didn't shut off like before" but it was slowly dying. After it dropped below 35mph I decided to kill it and pull over. I then decided to call the guy I bought it form less than an hour ago. I told everything you see above ^ . He said he would haul it home for me but could not take it back because he didn't know what I had did to it.

Once I got it home I started the scoot and drove up my driveway everything seemed fine it was pretty late at this point so I parked it and went to bed. The next morning I decided to take it around my neighborhood to see what was wrong with it. It started up and looked good but once I got up to 40mph the temperature was pegged but the power was back. So I thought to check the coolant the reservoir was full but when I looked under the seat I found a hole in the plastic filler. Upon further inspection I found rigging that left the radiator with no power source. The fan and fuel pump worked but I found nothing that would lead me to believe the radiator would work (it has a plug with nothing connection to it) I also found that the fuel pump was (wrong)aftermarket and was "resting" on the scoots underpinning.

What do you guys think?



Login or Register to Remove Ads
  Reply With Quote
 

Tags
mc-13-250 cooling


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:05 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.