|
|
|
Thread Tools | Search this Thread | Display Modes |
02-14-2013, 10:48 AM | #1 |
Join Date: Oct 2012
Location: Germany
Posts: 140
|
[SOLVED] Popping and hesitation on throttle
Hi guys,
After my aftermarket filter broke off it's hose I got tired of experiments and put my old air box back on. I re-jetted to its original jets - the #30 idle and the #85 main (as in my bike's specs). Since then I get this strange hesitation on takeoff with few popping sounds from the exhaust and deep drop in RPMs - bike hesitates for like 1 to 2 seconds, RPMs go really low, but then suddenly it accelerates fast and runs great overall. Sometimes, when I decelerate quickly, I hear a single strong 'POP!' from the exhaust. I thought it's running lean and put a #90, but that was too much and bike ran like crap and didn't fix the problem. Now I am with the #85 again since #80 is too lean (I have #70 #75 #80 #85 #90 #95 sizes only). Mixture screw is at 2 1/2 turns out, exhaust is only visually modified, air box is not modified at all, all hoses are great, I have no air leaks at neither side of the carb and intake is 2 months old, carb's diaphragm is new as well, needle clip is in the middle slot, chops are tobacco brownish, perhaps a hint lighter. Any ideas? Thanks in advance, Ivan
__________________
50cc 139QMB, 7g sliders, manual petcock w/ transparent lines, Naraku CDI, Naraku belt, high output racing coil, 18.4mm CVK clone w/ #85 mj and #38 idle, needle @ leanest, OEM pipe mod, Kenda tires, NGK Iridium, lots of LED mods, 2.61L/100km (90 MPG) Last edited by 50cc; 02-15-2013 at 07:31 AM. Reason: Marking thread as 'Solved' |
|
|