|
09-12-2013, 08:41 PM | #1 |
Join Date: Sep 2013
Posts: 8
|
2008 Robot (actually Jonway YY50QT-T20)
Folks,
This is the scooter I own a 2008 Robot by Jonway. It has been sitting outside for over a year now. I had started the scooter last fall, added stabil and let it run for quite sometime and winterized it. Earlier this year, in jan/feb when the weather was fine, I took it out to check if it would start - It would start but if I gave some throttle would shut right off...I gave up disappointed. This past weekend, I gave it a nice wash and did the following:
One thing that bothers me is the line that comes out of the fuel tank (at the top, see this picture where to the right of the fuel cap is the golden metal flange securing the gas tank and right next to it is a line - what line is this? where should this go? when I opened the cowling, this line was all by itself, connected to nothing. Also there is another line that is connected to the air-intake pipe...this snakes its way up - strangely, this was not connected to nothing... If you see the picture closely, I duct-taped both these lines (sliding one into another)... Other than this wonky arrangement, I did everything right. My questions are, what are those 2 pipes for? Am i missing a part?Any pointers in why i cannot start the scoooter? any help appreciated. |
|
|