|
05-25-2014, 09:43 AM | #1 |
Join Date: May 2014
Posts: 15
|
Gy6 problems
Hello,
I am new here... but i have some serious problems, first, i bought: - 72cc whole cylinder kit (with head - harder springs), - A9 performance camshaft - main jets (82-90) - new air filter, engine oil, new spark,... I have tried to install those things, but i realised the valve head (one spring) was allways stuck - bad valve spring... so no good... -then i installed stock valve head. -Then i was on timing.... the timing mark and cam marks was correct (at TDC)... but now that i installed new cam, i cannot allign the cam marks perfectly with the block. So i leaved it so, because i thinked, that if im wrong for 1 tooth, the scooter must work, and i can adjust it later, when i test it... -then i cleaned the carb and changed the main jet with a 85. until then, i cannot start the scooter... even if i suck on the vacuum hose, to fill the carb.. it dont works... i have air, i have a good spark-s,... but for the fuel i am not so sure... because the spark is dry... i noticed that if i touch at the carb air intake, it somehow, "trows" the fuel out.. not "sucks".... Can this be the problem, and if, whats the problem... please correct me, my steps, what i did good and what wrong... correct me.. i want the scoot so, want to fix it... tnx |
|
|