Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 50cc - 124cc
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 05-25-2014, 09:43 AM   #1
asres   asres is offline
 
Join Date: May 2014
Posts: 15
Gy6 problems

Hello,

I am new here... but i have some serious problems, first, i bought:
- 72cc whole cylinder kit (with head - harder springs),
- A9 performance camshaft
- main jets (82-90)

- new air filter, engine oil, new spark,...

I have tried to install those things, but i realised the valve head (one spring) was allways stuck - bad valve spring... so no good...
-then i installed stock valve head.
-Then i was on timing.... the timing mark and cam marks was correct (at TDC)... but now that i installed new cam, i cannot allign the cam marks perfectly with the block. So i leaved it so, because i thinked, that if im wrong for 1 tooth, the scooter must work, and i can adjust it later, when i test it...
-then i cleaned the carb and changed the main jet with a 85.

until then, i cannot start the scooter... even if i suck on the vacuum hose, to fill the carb.. it dont works... i have air, i have a good spark-s,...

but for the fuel i am not so sure... because the spark is dry...
i noticed that if i touch at the carb air intake, it somehow, "trows" the fuel out.. not "sucks"....

Can this be the problem, and if, whats the problem... please correct me, my steps, what i did good and what wrong... correct me.. i want the scoot so, want to fix it...

tnx



Login or Register to Remove Ads
  Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:55 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.