|
07-24-2014, 12:02 PM | #1 |
Join Date: Jul 2013
Location: St. Pete, FL
Posts: 12
|
Pirelli SL26 3.50-10 Tire Proper PSI
Hi,
I wanted to share some information with the site about Pirelli SL26 3.50-10 tires. There is tons of information about proper PSI on tires. Most people underinflate their tires and cause extra wear and tear. I have seen lots of posts about Pirelli tires wearing too fast. I recently had a pair installed on my 50cc scooter. I asked the Pirelli dealer what to run them at. He said 28 PSI for a soft ride and 35 PSI for best performance. I put them both at 34 PSI. I emailed Pirelli tech to inquire about proper PSI. I told them I weigh 185Lbs., the bike weights 200Lbs., and that I run WOT on hot Florida streets. This is their reply email. I hope this clears up some people's opinions on Pirelli wear and proper inflation. **Notice the Min 42 PSI** ***They do say 47 PSI on the sidewall*** -Shane
__________________
2013 TaoTao ATM50-A1 (60cc) Valve Lash at .003" in-out 20mm CVT Carb Huge fuel lines and filter NGK CR7HIX Spark Plug Stock Air Box (Pulled Plug) Stock Exhaust Pirelli SL26 3.50-10@46 PSI I can bury the Needle, Fast... |
|
|