![]() |
|
![]() |
#1 |
![]() Join Date: Apr 2014
Posts: 14
|
GY6 Charging issue
I put new stator in and checked voltage at regulator ....while voltage regulator was plugged in and scooter running....black lead to green ground and red lead to yellow=10.5-11 ac volts.....to low.
Black lead to green ground and red lead to white=18 ac volts...good! Black lead to green ground and red lead to red wire=12 dc volts....to low! When I unplug regulator and check voltage coming up from stator...voltages are good to yellow and white wire. I tried 2 different voltage regulators with same result.......I ordered a new regulator just to make sure the 2 I have aren't bad....anyone have any other ideas?....TY! |
![]() |
|
|