|
04-22-2013, 08:39 PM | #1 |
Join Date: Feb 2013
Location: Adams County Pennsylvania
Posts: 5
|
Wrong head/valve height
I was getting the scooter ready for this summer....wanted to take the emission crap off...got a 80cc upgrade BBK. So now I know my engine had the 69mm valves and I got the wrong kit. My question is can I just get the rocker arm assembly for the short valves or is there another difference??
I also found that the intake plastic riser was cracked...probably the hesitation I had when giving the throttle after coasting down a hill. |
04-22-2013, 08:52 PM | #2 |
Join Date: Sep 2011
Location: staunton va
Posts: 319
|
yes you can just get the rocker arm and fix this issue
__________________
2010 Cpi Oliver 70cc, naruku trans kit, downhill handle bars, tecnigas rsll pipe, s6 4g rollers, Vento R4 with 90cc 1e52qmf technigas next r 100cc pipe Naruku, 21mm race carb, s6 4.5 g rollers |
04-27-2013, 07:24 AM | #4 |
Join Date: Feb 2013
Location: Adams County Pennsylvania
Posts: 5
|
The plastic riser for the carb has an o ring on the head side. The way it was assembled the gasket was between the riser and the head. There was not a gasket between the manifold and the riser. Seems a bit backwards to me with the presence of an o ring but I thought I would check with the forum. So what is the correct assembly for the intake? Gasket, riser, manifold or riser, gasket, manifold?
|
Thread Tools | Search this Thread |
Display Modes | |
|
|