Help Please?

99owned · 03-07-2013, 10:52 AM

I got 2 Hyosung something 2 stroke scooters, They both leak gas like hell out of the overflow tube and need to be held wide open or air restricted to run. One of them has a new carb, but it leaks too? I'm clueless. They are the same exact scoot, so if I fix one, The other is fixed too. both doing the same thing. How could the float be sticking on a new carb? :X

teddy554 · 03-07-2013, 12:30 PM

maybe your fuel petcock is also bad and the fuel stop on the carb cant do the job buy itself, no fuel should be getting through the petcock why the motor isnt running

scootnwinn · 03-07-2013, 01:10 PM

Never underestimate the power of a manufacturer to fail. Check the float needle assembly and float level yourself...

MEAN_MOTOFINO · 03-07-2013, 02:56 PM

Yep check floats. They may be sticking or not adjusted properly!

99owned · 03-07-2013, 06:08 PM

:/ alright, Gotta drop 2 motors tonight then. Feeling like crap already, Now this. The way it's set up I can't get to the carb without take the motor out.

teddy554 · 03-07-2013, 09:46 PM

yeah pull the seat tub out, you are pulling the motor to get to the carb?

99owned · 03-16-2013, 02:07 PM

The motors have to be pulled out. It's a complete metal frame, Seat tub is metal, welded to the frame. So... yeah. So much for accessibility

teddy554 · 03-16-2013, 09:35 PM

damn that sucks what models do you have, can you post any picturs i just like to see what you carb looks like

99owned · 03-16-2013, 10:53 PM

I'll get some tomorrow I guess, Too dark out there atm. They are like a 2004 hyosung sense? Or something like that?

teddy554 · 03-17-2013, 12:26 AM

think the sf50 is the sense
http://files.hyosungmotorsusa.com/SF...ice_manual.pdf
http://www.hyosungmotors.hu/download...ervice-manual/
where i got some info from http://korider.com/index.php?board=18.0

Firehawk989 · 03-18-2013, 02:45 AM

I have a 2001 Hyosung Sense. It has the welded tub like you describe, but you can get to the carb easily by taking the side plastics off. There is also a small access hole for changing the spark plug and tightening head bolts etc if you pull the carpet in the tub out.

99owned · 03-19-2013, 09:04 PM

Yeah, My ratchet is too big Lol

03-07-2013, 12:30 PM	#2
teddy554 Join Date: Sep 2011 Location: staunton va Posts: 319	maybe your fuel petcock is also bad and the fuel stop on the carb cant do the job buy itself, no fuel should be getting through the petcock why the motor isnt running __________________ 2010 Cpi Oliver 70cc, naruku trans kit, downhill handle bars, tecnigas rsll pipe, s6 4g rollers, Vento R4 with 90cc 1e52qmf technigas next r 100cc pipe Naruku, 21mm race carb, s6 4.5 g rollers
	0

03-07-2013, 02:56 PM	#4
MEAN_MOTOFINO Join Date: Jan 2013 Location: South Carolina Posts: 233	Yep check floats. They may be sticking or not adjusted properly! __________________ 05 Motofino 150cc
	0

03-07-2013, 09:46 PM	#6
teddy554 Join Date: Sep 2011 Location: staunton va Posts: 319	yeah pull the seat tub out, you are pulling the motor to get to the carb? __________________ 2010 Cpi Oliver 70cc, naruku trans kit, downhill handle bars, tecnigas rsll pipe, s6 4g rollers, Vento R4 with 90cc 1e52qmf technigas next r 100cc pipe Naruku, 21mm race carb, s6 4.5 g rollers
	0

03-16-2013, 09:35 PM	#8
teddy554 Join Date: Sep 2011 Location: staunton va Posts: 319	damn that sucks what models do you have, can you post any picturs i just like to see what you carb looks like __________________ 2010 Cpi Oliver 70cc, naruku trans kit, downhill handle bars, tecnigas rsll pipe, s6 4g rollers, Vento R4 with 90cc 1e52qmf technigas next r 100cc pipe Naruku, 21mm race carb, s6 4.5 g rollers
	0

03-17-2013, 12:26 AM	#10
teddy554 Join Date: Sep 2011 Location: staunton va Posts: 319	think the sf50 is the sense http://files.hyosungmotorsusa.com/SF...ice_manual.pdf http://www.hyosungmotors.hu/download...ervice-manual/ where i got some info from http://korider.com/index.php?board=18.0 __________________ 2010 Cpi Oliver 70cc, naruku trans kit, downhill handle bars, tecnigas rsll pipe, s6 4g rollers, Vento R4 with 90cc 1e52qmf technigas next r 100cc pipe Naruku, 21mm race carb, s6 4.5 g rollers
	0

03-16-2013, 02:07 PM	#7
99owned Join Date: Aug 2012 Posts: 51	The motors have to be pulled out. It's a complete metal frame, Seat tub is metal, welded to the frame. So... yeah. So much for accessibility
	0

03-16-2013, 10:53 PM	#9
99owned Join Date: Aug 2012 Posts: 51	I'll get some tomorrow I guess, Too dark out there atm. They are like a 2004 hyosung sense? Or something like that?
	0

03-18-2013, 02:45 AM	#11
Firehawk989 Join Date: Mar 2013 Location: Vancouver, BC Posts: 198	I have a 2001 Hyosung Sense. It has the welded tub like you describe, but you can get to the carb easily by taking the side plastics off. There is also a small access hole for changing the spark plug and tightening head bolts etc if you pull the carpet in the tub out.
	0

03-19-2013, 09:04 PM	#12
99owned Join Date: Aug 2012 Posts: 51	Yeah, My ratchet is too big Lol
	0