|
07-23-2013, 08:44 AM | #1 |
Join Date: Jul 2013
Posts: 3
|
I've been stumped for awhile now! HELP
So I got a "freebie" scoot from a friend that just let it sit around. Its only got about 330 miles on it. Its a Panterra Freedom. Apparently this was sold via Pep Boys, but its a GY6 QMB139 chinese scoot like most the others I've found around here.
I've made some modifications, such as a new CDI, new coil, new spark plug, new brake switch (foot pedal), new torque springs, new rollers, new clutch springs, new belt, new petcock valve, big bore kit and new carb. Whew, that was a lot of stuff over the past year. Here's the problem, I'm a NOOB to scooters, and I believe I am plumbing the carb incorrectly. I have 3 inlets/ports off this carb. I just am not sure how I would plumb vacuum and fuel. I feel like I've tried everything (although I know something is off). I've numbered the ports on the pic of the carb, so if a great tech could help me identify I would be eternally grateful! |
07-23-2013, 08:59 AM | #2 |
Join Date: Sep 2012
Location: West Haven CT
Posts: 1,165
|
__________________
"4wheels move the body 2 wheels move the soul" Duty, Honor, Country. Those three hallowed words reverently dictate what you ought to be, what you can be, what you will be. Douglas MacArthur |
07-24-2013, 08:48 AM | #4 |
Join Date: Jul 2011
Location: Connecticut
Posts: 493
|
That's not an overflow, that's the atmosphere vent for the decelerator slide. If fuel comes out of there, you have a jammed open float.
__________________
2011 Roketa MC-23-150 4T 150cc 157 qmj 24mm carb w 115 main jet and paper cone air filter Manual petcock w Tygon fuel lines Scrappy Dog Scooters Retro-slash stainless straight-thru exhaust RED spring clutch Adjustable CDI (brand unknown, it's blue and red and works great!) KOSO high performance variator w 12g sliders Gates Powerlink 835-20-30 belt GPS verified 65mph on flats. |
|
|