|
10-11-2013, 11:05 PM | #1 |
Join Date: Jan 2013
Posts: 31
|
how fast is a 150cc gy6 scooter
I have a 49cc scooter with a cheap 100cc big bore kit, performance exhaust, performance cdi, 100 main jet and uni filter. It has a top speed of 52 mph(GPS) on flat ground no wind. So how fast is a stock 150cc scooter?
|
10-12-2013, 02:32 AM | #2 |
Join Date: Jul 2011
Posts: 127
|
No exact answer as there is variables like weight , tire size ETC . Many have 8 to 9 HP while my Echarm which is a liquid cooled 150 with Ducatti EFI instead of a carb puts out 12 HP and has tall 16 inch wheels . Stock it did 65 when new then 70 after break in . I replaced the rollers with sliders and it went up to 75 MPH . I got a ticket for going 72 MPH . So far I have dusted every 150 I raced even when I had a passenger . I had 12g sliders and I will try 13g soon since mine are worn down .
Now if you really want a small pocket rocket get a 2T scoot with a Minarelli also called JOG ( Yamaha design ) engine as there is boocoos of performance goodies and I can go 50+ MPH up a large steep hill . A 2T will outrun a 4T all day long except those that are chain driven since there are single geared where a CVT has gear like effects with the belt expanding |
10-12-2013, 03:06 AM | #3 |
Join Date: Jan 2013
Posts: 31
|
cool! someone is selling a 150cc engine assembly on craiglist for $300 comes with rear wheel, carburetor, rear shock and exhaust muffler. I'm planning on buying it and a motor mount from monstergy6 along with a 150cc wire harness
i want to convert my 49cc to a 150cc |
10-12-2013, 03:26 AM | #4 |
Join Date: Jul 2011
Posts: 127
|
Can you weld and do custom metal fabrication ? Not worth it when you can buy a 150 or even better a 2T that you can hot rod much easier
|
10-12-2013, 04:50 AM | #5 |
Join Date: Jan 2013
Posts: 31
|
i just want my 4 stroke scoot to go faster on steep hills without the engine screaming
i do have a 2t vento zip gt5 that has a jog clone minarelli engine. i'm trying to soup it up to go as fast as this guys rexy scooter which also has a clone engine |
10-12-2013, 05:31 PM | #6 |
Join Date: Mar 2013
Location: Tennessee
Posts: 35
|
The 150cc that I have is all stock except for the electric fuel pump. It will with my 180 lbs on board show a little over 60 mph on the speedometer. However the actual top speed is 57 mph. I have driven it on the highway a few times but had to stay at WOT to keep 55. Mine has a tall windscreen, but I think that helps streamline it more than being without.
|
10-13-2013, 08:46 AM | #7 |
Join Date: Jul 2011
Location: Connecticut
Posts: 493
|
My MC-23 style 157qmj w 13" wheels when 50-55 fully stock.
After mods, it has a top speed of 62mph GPS verified, which naturally means way more on a down hill (81mph GPS) :p Anyway, a 157 can go MUCH MUCH faster than that video.
__________________
2011 Roketa MC-23-150 4T 150cc 157 qmj 24mm carb w 115 main jet and paper cone air filter Manual petcock w Tygon fuel lines Scrappy Dog Scooters Retro-slash stainless straight-thru exhaust RED spring clutch Adjustable CDI (brand unknown, it's blue and red and works great!) KOSO high performance variator w 12g sliders Gates Powerlink 835-20-30 belt GPS verified 65mph on flats. |
10-14-2013, 05:47 PM | #8 |
Join Date: Jun 2012
Posts: 15
|
I have a 2004 Diamo with a stock 150cc GY6 that runs great. My results are similar to oldkid's. I'm 170 lbs. and on a level road with no or mild wind, I can get up to about 62 mph. Add in any kind of long grade or riding into a stiff wind and it's down to 45.
|
10-16-2013, 09:04 PM | #11 |
Join Date: Oct 2013
Posts: 5
|
Hahahaha! Maybe you're right! Then if we do split up I can tell him he has to take all his stuff. There is no room in the garage baby, that scooter needs space! Too funny. Thanks for the welcome!
|
|
|