|
|
|
05-14-2015, 04:37 PM
|
#1 |
 Join Date: May 2015
Posts: 1
|
problems with scooter after head replacement
I just replaced the head yesterday due to broken exhaust stud. I replaced the exhaust with a performance exhaust from ebay. Also rejetted from 108(stock) to 120. Now it kinda bogs when I rev it and when I go WOT and hold it, it acts like I'm going open/closed/open/closed. In the video I go immediate WOT and hold it until I stop video.
Any ideas? Here is youtube video. |
|
|
05-17-2015, 03:46 AM
|
#2 |
 Join Date: Feb 2015
Posts: 121
|
Did you re-adjust the air/fuel mixture screw yet?
|
|
|
|
05-17-2015, 12:21 PM
|
#3 |
Join Date: Nov 2013
Location: Orlando, Fl.
Posts: 75
|
Head replaced
The jetting change was Far too large. Go back to the 108 and try it. If drastic improvement then go up in size. I would imagine a max of 115 but it's really trial and error. Check the plug to achieve the best jet for your conditions.
|
|
|
 |
|
|
Linear Mode
