|
08-08-2015, 05:09 PM | #1 |
Join Date: Aug 2015
Posts: 7
|
brake fluid reservoir seals
Has anyone ever found a supplier for the black rubber "accordion" expanding seal for the top of the hydraulic brake reservoirs on typical Chinese scooters?
I can find new cover plates, complete new brake assemblies with reservoir, and even a few rebuild kits for the piston with seals, but I haven't found anywhere listing just the top expanding rubber diaphragm seal. |
08-14-2015, 04:00 PM | #2 |
Join Date: Aug 2015
Posts: 7
|
Given no responses in 10 days, I guess it's safe to assume that there is no source for these seals :-(
__________________
www.scooterfocus.com 2008 Shenke YY150T-12 www.rx3adventure.com 2015 CSC Cyclone RX3 |
08-14-2015, 06:13 PM | #3 |
Join Date: Oct 2008
Location: Hyde Park, NY
Posts: 1,132
|
Did you try Eagle ATV parts, Roketa.com, partsforscooters or even someone like Bintelli? If there's even a slight chance Matt Maney at PFS would know.
__________________
2008 Eagle Milano 150- 9,679 miles 2009 Honda Rebel 250- 10,434 miles 2009 CF Moto Fashion- 16,023 miles 2009 MC-114 50cc Cub Clone- 4,317 miles twowheeler.yolasite.com/ That's 30,049 China Scootin miles and Counting. |
08-16-2015, 04:44 PM | #4 |
Join Date: Aug 2015
Posts: 7
|
I did look at PartsForScooters, Eagle ATV and a bunch of other Chinese scooter parts suppliers. They all had a bunch of different gaskets for everything but the brake fluid reservoir and they had braking system parts including hoses, reservoir top covers and entire brake assemblies - but no reservoir gasket/seal.
I did not try emailing any of the sites and asking though. I assume if they sold the seal it would be on their website with all the other braking system stuff, but I guess it's worth a shot. I don't currently NEED new seals, but I was overhauling the braking system on a used scooter, flushing the brake lines etc. and I would have replaced these seals if they had been available, since the old ones were deformed at the edges and encrusted with ???. I cleaned them off and reused them but I was surprised that replacements are so hard to find
__________________
www.scooterfocus.com 2008 Shenke YY150T-12 www.rx3adventure.com 2015 CSC Cyclone RX3 |
08-16-2015, 09:29 PM | #5 |
Join Date: Oct 2008
Location: Hyde Park, NY
Posts: 1,132
|
If you call and ask you might get better results. If they don't stock it they might be able to order it or know where you could get it. There's a lot of knowledge out there. I'm sure a dealer somewhere has needed one and most of these scooters use the same parts.
__________________
2008 Eagle Milano 150- 9,679 miles 2009 Honda Rebel 250- 10,434 miles 2009 CF Moto Fashion- 16,023 miles 2009 MC-114 50cc Cub Clone- 4,317 miles twowheeler.yolasite.com/ That's 30,049 China Scootin miles and Counting. |
|
|