Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 250cc +
Reply
 
Thread Tools Search this Thread Display Modes
Old 11-29-2015, 06:14 PM   #1
lux   lux is offline
 
Join Date: Nov 2015
Posts: 3
Cracked crankcase breather tube on a Honda Reflex

I was trying to service the crankcase breather on my 04 Reflex, and while trying to remove the plug it cracked. Now that I think about it I noticed a hairline crack before I started. I'm not really familiar with what its function is, or the consequences of the crack. In any case, I'd like to replace it. Where would I find a replacement? I'm assuming I could find the right size hose somewhere. Thanks for your help.




Login or Register to Remove Ads
  Reply With Quote
Old 11-29-2015, 08:54 PM   #2
kz1000st   kz1000st is offline
 
kz1000st's Avatar
 
Join Date: Oct 2008
Location: Hyde Park, NY
Posts: 1,137
The plug is there to release muck that collects from the engine moisture and oil combining. Just replace the hose with something similar and open it periodically to empty out the material that collects in there. It being broken is not life threatening.
__________________
2008 Eagle Milano 150- 9,679 miles
2009 Honda Rebel 250- 10,434 miles
2009 CF Moto Fashion- 16,023 miles
2009 MC-114 50cc Cub Clone- 4,317 miles
twowheeler.yolasite.com/

That's 30,049 China Scootin miles and Counting.
  Reply With Quote
Old 11-29-2015, 09:25 PM   #3
lux   lux is offline
 
Join Date: Nov 2015
Posts: 3
Does it necessarily need to be air tight at the moment, or could I drive without it harming anything? And thank you for your quick reply. I guess I just need to figure out what size I need now.

Edit: Seeing lots of white 'smoke' from the exhaust -- noticed that last time I was riding which I thought was just due to a lot of moisture in the air (dense fog and air stagnation), but dunno if it's caused, or worsened, by the broken drain tube.



Login or Register to Remove Ads

Last edited by lux; 11-29-2015 at 10:27 PM.
  Reply With Quote
Old 11-30-2015, 01:58 PM   #4
crossbolt   crossbolt is offline
 
crossbolt's Avatar
 
Join Date: Feb 2009
Location: Hillville, TN
Posts: 22
I think that most of these puke tubes are on the FILTERED side so your engine is probably sucking unfiltered air.

Karl
  Reply With Quote
Old 11-30-2015, 02:23 PM   #5
bandito2   bandito2 is offline
 
bandito2's Avatar
 
Join Date: Jan 2013
Location: Southeast Mchigan
Posts: 169
In a pinch... Clean it and give it a wrap of Duct tape it until you can scrounge a short piece of hose that will fit. Not a big deal really.
Hardware store might have something or one of the big box lumber stores like Home Depot... you might have to buy a foot of it though. Not sure of the ID (inner diameter) or wall thickness so the existing clamps might not fit. Small typical worm gear/screw type clamps or zip ties might work well enough.
__________________
Southeast Michigan Dark Side Rider
4 Honda Reflex scooters & a Big Ruckus
Originator of the
"Darkside" Honda Reflex.
"Yeah dude, that IS a car tire there on the back of my scooter."

Sometimes I'm so far outside of the box, the Hubble telescope can't find me



Login or Register to Remove Ads
  Reply With Quote
Old 11-30-2015, 02:25 PM   #6
kz1000st   kz1000st is offline
 
kz1000st's Avatar
 
Join Date: Oct 2008
Location: Hyde Park, NY
Posts: 1,137
The tube is just releasing crud deposits through the crankcase breather into the bottom of the air box. Considering that engine breathers ran open for decades it really isn't a big deal. Exhaust blow white in cold weather anyway so it might just be that you're paying attention to it and seeing it. That hose being open or cracked won't change the way an engine runs.
__________________
2008 Eagle Milano 150- 9,679 miles
2009 Honda Rebel 250- 10,434 miles
2009 CF Moto Fashion- 16,023 miles
2009 MC-114 50cc Cub Clone- 4,317 miles
twowheeler.yolasite.com/

That's 30,049 China Scootin miles and Counting.
  Reply With Quote
Old 11-30-2015, 06:26 PM   #7
lux   lux is offline
 
Join Date: Nov 2015
Posts: 3
Thanks for all the help guys, and for putting my mind at ease! I was able to find some rubber tubing which fit, so I stuck that on there and all is well. And yeah, the exhaust was only water evaporation which cleared up after a few minutes so I was just being a hypochondriac. Cheers.
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:38 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.