![]() |
|
![]() |
#1 |
![]() Join Date: Sep 2024
Location: Fort Wayne, Indiana
Posts: 3
|
![]()
I own a 2013 Ice bear Mini Cruzzer. It has almost 4,700 miles on it and I smelled gasoline. So, I checked underneath the trike and the tank was wet. At first, I thought it was the petcock, but I found a drip of fuel on the oppisite side of the tank. What would be the best way to fix it?
Last edited by Yenkna; 09-28-2024 at 09:04 AM. Reason: error |
![]() |
![]() |
#2 |
![]() Join Date: May 2017
Location: Norfolk, VA
Posts: 599
|
Plastic tank or metal? I've heard of plastic tanks swelling from the ethanol in the gasoline but have never seen a example of it happening enough to make a tank leak. I'd pull the tank if necessary and see were the leak is coming from and if possible, what caused it. It could just be a bad seam weld.
Also, could it be a bad gas cap gasket? I've had them get dry rotted and let a bit of gas leak out while gas was splashing around in the tank. |
![]() |
![]() |
#4 |
![]() Join Date: May 2017
Location: Norfolk, VA
Posts: 599
|
We've completely dried out fuel tanks before and had splits and other damage brazed. Also used that Kreem tank sealant with mixed results. Both require you to remove the tank from the scooter and on some (Burgman scooters) it be a royal PITA. Also seen mixed results with JB Weld BUT I've heard a rumor they (JB Weld) sell a fuel resistant "tank seal" kit.
So you found that there is a split causing the leak? If so, any idea what caused it? My Burgman had a leak where the fuel meter float went into the tank. I think a gasket failed. The tank gets slightly pressurized while running and fuel would seep out. I never fixed it because of the tank location. Let us know your findings. |
![]() |
![]() |
Tags |
answers, questions, trike repairs |
|
|