Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Media :: Reviews :: Classifieds :: General > General Scooter Discussion
Reply
 
Thread Tools Search this Thread Display Modes
Old 03-04-2013, 06:00 PM   #31
millsc   millsc is offline
 
millsc's Avatar
 
Join Date: May 2012
Location: missouri
Posts: 164
get spark plug part number 7544 at advanced auto parts no need to gap it, its an irridium
__________________
B.A.M.F. tapout scoot
24mm carb 150cc intake
performance exhaust A9 cam
hoca big valve head 16/50 gears
9.25 gram dr pulley sliders koso variator 1.5k torque spring
orange coil orange unlimted cdi
uni filter
gates premium belt
2012 taotao vip cy50a scrappys 110cc big bore kit 52mm "88cc"
100 main jet 38 idle iridium plug custom paint, leds and decals alarm system
naraku hd crankshaft



Login or Register to Remove Ads
  Reply With Quote
Old 03-04-2013, 06:50 PM   #32
scootnwinn   scootnwinn is offline
 
scootnwinn's Avatar
 
Join Date: Aug 2011
Location: Tierra Azul, NM
Posts: 739
Tire should not spin at all when idling sorry the other post wasn't clear... I should have said turn the idle down until the wheel stops spinning. Idle speed is around 1600 rpm and clutch engagement above 2000 rpm...

Sorry for the typos and ambiguity...
__________________


Do not fear mistakes. You will know failure. Continue to reach out.
- Benjamin Franklin

Join the HARDCORE

1983 Honda GL650I SilverWing
  Reply With Quote
Old 03-04-2013, 06:59 PM   #33
teddy554   teddy554 is offline
 
teddy554's Avatar
 
Join Date: Sep 2011
Location: staunton va
Posts: 319
in-case you dont wont to buy a 9 dollar plug ngk cr7has are 2.50 and the plug millscmention is also known has ngk cr7hix
__________________

2010 Cpi Oliver 70cc, naruku trans kit, downhill handle bars, tecnigas rsll pipe, s6 4g rollers, Vento R4 with 90cc 1e52qmf technigas next r 100cc pipe Naruku, 21mm race carb, s6 4.5 g rollers



Login or Register to Remove Ads
  Reply With Quote
Old 03-04-2013, 07:21 PM   #34
tdsj   tdsj is offline
 
tdsj's Avatar
 
Join Date: Mar 2013
Location: Indiana
Posts: 49
Thanks guys, I have the scooter wrapped up in a tarp right now for the night. I'll go back out in the morning and let it warm up and see what the rpm it idles at. Glad it has a gauge for that or I wouldn't have an idea of how to test it lol. And I may just get the cr7hix aka the 7544 if that is the best recommended one. I was going to change the oil in the scooter to synthetic but I read on another post somewhere that using synthetic to early in the bikes life may cause it not to set correctly. So I'll wait until 1000km before doing it. And in the mean time just use regular oil. Any choice on oils?
  Reply With Quote
Old 03-04-2013, 07:26 PM   #35
millsc   millsc is offline
 
millsc's Avatar
 
Join Date: May 2012
Location: missouri
Posts: 164
I use 10w 40 castrol non synthetic all year around, unless its a new top end then i use 15w 40 rotella t to break in unless its under 40 degrees
__________________
B.A.M.F. tapout scoot
24mm carb 150cc intake
performance exhaust A9 cam
hoca big valve head 16/50 gears
9.25 gram dr pulley sliders koso variator 1.5k torque spring
orange coil orange unlimted cdi
uni filter
gates premium belt
2012 taotao vip cy50a scrappys 110cc big bore kit 52mm "88cc"
100 main jet 38 idle iridium plug custom paint, leds and decals alarm system
naraku hd crankshaft



Login or Register to Remove Ads
  Reply With Quote
Old 03-04-2013, 07:49 PM   #36
scootnwinn   scootnwinn is offline
 
scootnwinn's Avatar
 
Join Date: Aug 2011
Location: Tierra Azul, NM
Posts: 739
I like the castrol 10 40 too all year round... Motorcycle formula of course available at any auto zone. Synthetic is probably a waste of money if you are changing every 1000 miles...
__________________


Do not fear mistakes. You will know failure. Continue to reach out.
- Benjamin Franklin

Join the HARDCORE

1983 Honda GL650I SilverWing
  Reply With Quote
Old 03-04-2013, 08:09 PM   #37
tdsj   tdsj is offline
 
tdsj's Avatar
 
Join Date: Mar 2013
Location: Indiana
Posts: 49
Thanks I appreciate the suggestions. As soon as it's time to change the oil the first time I will use the 10 40 castrol since it got 2 thumbs up right away.
  Reply With Quote
Old 03-04-2013, 08:17 PM   #38
prodigit   prodigit is offline
 
Join Date: Jul 2012
Location: Miami, FL
Posts: 390
Try to set the spark plug gap to 0.3mm; 0.3 or 0.4 (stock, from the factory they come at 0.635mm). On my ATM it works best at just over 0.254mm.

Good job on the idle adjustment!
You'll notice, that now, the idle is set correctly, but especially if it's set from the handle, and not the carb, that the idle will differ with temperature.
You'll have to adjust on the carb too.
You'll notice that now it might run well, but on a 50 mile trip on a hot day, your scoot might be idling at 2k RPM, and wants to go forward on a red light.
That's bad, so it needs to be re-adjusted after the cold days pass.

As for oil, depends on your temperature.
At below 60 degrees, 10W30, or 10W40 will work just fine.
below 80 degrees, 10W40 or 15W40 work fine.
above 80 degrees, 15W40 or 15W50.

Unlike many people's reviews, the only reason why to get dino oil in the breakin, is if the dino oil is cheaper. Any other reason is not valid. Mobil actually recommends it's synthetic oil even for breakin!
I personally did my ATM50 with synthetic, and had fabulous results, better than most other people!
If synthetic or semi-synthetic oil is the same price, get synthetic (because 90% of synthetic oil you'll find in the stores is actually dino oil, with synthetic stabilizers in, not actual 100% synthetic oil, unless it's like 2-3x the price).
Also at the breakin you'll be throwing away the oil WAY before it becomes bad.
You throw it away because it has particles in it (metal flakes, carbon,....).
But your oil will only be worn for less than 5-10%.

Anyway, Castrol, Valvoline, Mobil, all good brands.
There are few 100% synthetic oils out there, but IMHO they're a waste to use on a chinese scoot; because a tiny engine is just not handling super good oil very well like a large engine (a large engine could do way longer with fully synthetic oil than a scooter. On a scooter, regardless of oil life and condition, it still needs to be changed every 1000km's).
  Reply With Quote
Old 03-04-2013, 10:00 PM   #39
millsc   millsc is offline
 
millsc's Avatar
 
Join Date: May 2012
Location: missouri
Posts: 164
Dont gap the irridium plug you'll most likely break the electrode, leave it be no need to gap the irridium plug
__________________
B.A.M.F. tapout scoot
24mm carb 150cc intake
performance exhaust A9 cam
hoca big valve head 16/50 gears
9.25 gram dr pulley sliders koso variator 1.5k torque spring
orange coil orange unlimted cdi
uni filter
gates premium belt
2012 taotao vip cy50a scrappys 110cc big bore kit 52mm "88cc"
100 main jet 38 idle iridium plug custom paint, leds and decals alarm system
naraku hd crankshaft
  Reply With Quote
Old 03-04-2013, 10:04 PM   #40
teddy554   teddy554 is offline
 
teddy554's Avatar
 
Join Date: Sep 2011
Location: staunton va
Posts: 319
+1 on that, 9 buck down the drain there
__________________

2010 Cpi Oliver 70cc, naruku trans kit, downhill handle bars, tecnigas rsll pipe, s6 4g rollers, Vento R4 with 90cc 1e52qmf technigas next r 100cc pipe Naruku, 21mm race carb, s6 4.5 g rollers
  Reply With Quote
Old 03-04-2013, 10:07 PM   #41
scootnwinn   scootnwinn is offline
 
scootnwinn's Avatar
 
Join Date: Aug 2011
Location: Tierra Azul, NM
Posts: 739
I agree I never gapped the one in my 150.
__________________


Do not fear mistakes. You will know failure. Continue to reach out.
- Benjamin Franklin

Join the HARDCORE

1983 Honda GL650I SilverWing
  Reply With Quote
Old 03-04-2013, 11:09 PM   #42
prodigit   prodigit is offline
 
Join Date: Jul 2012
Location: Miami, FL
Posts: 390
150's generally don't need a spark plug gap modification, as they have a better stator.
As far as gapping the spark plug, you don't need to break the center pin. You can bend the arm a bit, and if it's bent too much, bent it back with a screw driver without even touching the center pin.
The outside arm is fairly bendable, so it's not like you will break it anytime soon (unless you perhaps plan on bending it 90 degrees or more.
  Reply With Quote
Old 03-06-2013, 09:46 AM   #43
tdsj   tdsj is offline
 
tdsj's Avatar
 
Join Date: Mar 2013
Location: Indiana
Posts: 49
Hey I'm back. My computer got infected so I'm on my phone right now lol. I went to advance auto and they didn't have the cr7hix in stock. So I went to autozone and they didn't have it either so they said they could order it but that I would have to gap it. I said to the m that dont sound like the plug I'm wanting as u guys said it would come pre gapped. I also bought a 5 quart jug of 10 40 castrol. And some seafoam. My next question is how much oil will I be pitting in this scoot since the manual doesn't tell me these things lol.
  Reply With Quote
Old 03-06-2013, 09:54 AM   #44
scootnwinn   scootnwinn is offline
 
scootnwinn's Avatar
 
Join Date: Aug 2011
Location: Tierra Azul, NM
Posts: 739
Less than a quart ir until the stick says it full

just have them order the plug it will be pregapped don't worry about what the highly trained auto parts specialist tells you...
__________________


Do not fear mistakes. You will know failure. Continue to reach out.
- Benjamin Franklin

Join the HARDCORE

1983 Honda GL650I SilverWing
  Reply With Quote
Old 03-06-2013, 10:09 AM   #45
millsc   millsc is offline
 
millsc's Avatar
 
Join Date: May 2012
Location: missouri
Posts: 164
Quote:
Originally Posted by scootnwinn View Post
Less than a quart ir until the stick says it full

just have them order the plug it will be pregapped don't worry about what the highly trained auto parts specialist tells you...
+1 dont gap it advance auto parts always orders my plugs and it comes the next day
__________________
B.A.M.F. tapout scoot
24mm carb 150cc intake
performance exhaust A9 cam
hoca big valve head 16/50 gears
9.25 gram dr pulley sliders koso variator 1.5k torque spring
orange coil orange unlimted cdi
uni filter
gates premium belt
2012 taotao vip cy50a scrappys 110cc big bore kit 52mm "88cc"
100 main jet 38 idle iridium plug custom paint, leds and decals alarm system
naraku hd crankshaft
  Reply With Quote
Reply

Tags
chinese, tao, vip


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:21 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.