|
08-28-2014, 02:47 PM | #1 |
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
|
performance variator
any one buy it from scrappydawgs for there minerreli engines?they come in 4 and 5 gram sliders but I don't no what they come stock.i have a jonway 2t but cant download a manual
|
08-30-2014, 05:24 AM | #2 |
Join Date: Feb 2014
Location: las vegas
Posts: 100
|
weights have a much bigger effect on 2t scooters, buy both or get a few sizes, after my upgrades mine needed 8g to run fast and it took me a while to figure it out since i mostly use 5g for modified 4t 50s, 4g is a little light if those are the 2 to choose from get the 5s
__________________
2012 Jonway X 44mm Hoca crank 52mm Hoca big bore MMS big valve head raised ports, polished, milled .023 Hoca 26mm carb NCY titanium valve springs NOS wet nitrous system Holley fuel pump MMS variator Naraku CDI HT coil 4' Wheelie bar MMG stainless slip-on exhaust NGK "11" spark plug UNI filter 2014 Icebear Maddog too much to list http://mmsscooters.com |
08-30-2014, 12:20 PM | #3 |
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
|
I would think if two scooters have the same minerelli engines but weigh different they would have different weights.it only makes sence that they would put a lighter weight on a heavier scooter so your acceleration would be good.its hard to believe no one on this site can give me information on what a jonway 2t has for weghts.i know I can buy a scale but choose not to
|
09-02-2014, 08:43 AM | #4 |
Join Date: Jul 2011
Location: Connecticut
Posts: 493
|
8 or 9g weights are stock on the 1p40, regardless of bike size.
I found 5g to be the best for my E-Ton. My 139qmb bikes like 6g, and my kymco Yup 50 2t likes a mixture of 4 and 5g weights. I run strictly sliders as they grant you more low and mid-range acceleration.
__________________
2011 Roketa MC-23-150 4T 150cc 157 qmj 24mm carb w 115 main jet and paper cone air filter Manual petcock w Tygon fuel lines Scrappy Dog Scooters Retro-slash stainless straight-thru exhaust RED spring clutch Adjustable CDI (brand unknown, it's blue and red and works great!) KOSO high performance variator w 12g sliders Gates Powerlink 835-20-30 belt GPS verified 65mph on flats. |
09-02-2014, 09:37 AM | #5 |
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
|
I weighed mine and they are 5gr so I will but some 5 gr sliders and see if I see a difference if not ill try the 4 gr or mix the 4s and 5s.i weigh 185 so I think alittle lower on the weight will help my take off
|
|
|