need help finding parts please.

mmsscooters · 07-12-2016, 12:07 AM

Easy, if you bought a mianifold and it's too short you probably have a bn157qmj engine, they sell the right "raised" manifold at scrappydog scooters, any gy6 24 or 26mm carb will work fine. Upjet your carb 1 size and run a performance foam air filter, it will squeeze a bit but it will fit in your engine mount. 42mm foam filter, all this stuff is available at scrappy, check out this link and see if this is the right manifold, about 6 parts down. http://www.scrappydogscooters.com/GY..._BN157QMJ.html

07-12-2016, 12:07 AM	#2
mmsscooters Join Date: Feb 2014 Location: las vegas Posts: 100	Easy, if you bought a mianifold and it's too short you probably have a bn157qmj engine, they sell the right "raised" manifold at scrappydog scooters, any gy6 24 or 26mm carb will work fine. Upjet your carb 1 size and run a performance foam air filter, it will squeeze a bit but it will fit in your engine mount. 42mm foam filter, all this stuff is available at scrappy, check out this link and see if this is the right manifold, about 6 parts down. http://www.scrappydogscooters.com/GY..._BN157QMJ.html __________________ 2012 Jonway X 44mm Hoca crank 52mm Hoca big bore MMS big valve head raised ports, polished, milled .023 Hoca 26mm carb NCY titanium valve springs NOS wet nitrous system Holley fuel pump MMS variator Naraku CDI HT coil 4' Wheelie bar MMG stainless slip-on exhaust NGK "11" spark plug UNI filter 2014 Icebear Maddog too much to list http://mmsscooters.com
	0