Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 125cc - 249cc
Reply
 
Thread Tools Search this Thread Display Modes
Old 07-02-2013, 09:34 PM   #1
scott M   scott M is offline
 
Join Date: Jul 2013
Posts: 3
Help scooter problem



changed the cdi the battery is brand new and the starter motor is new. what else could it be?????



Login or Register to Remove Ads
  Reply With Quote
Old 07-03-2013, 02:52 AM   #2
DW   DW is offline
 
DW's Avatar
 
Join Date: Mar 2013
Location: Spokane Valley WA
Posts: 41
Check your battery connections where they connect to the wire.
Check your engine to frame ground.
New batteries aren't always fully charged.
  Reply With Quote
Old 07-04-2013, 12:10 PM   #3
scott M   scott M is offline
 
Join Date: Jul 2013
Posts: 3
battery is good checked it with a voltage meter and all the connections are good



Login or Register to Remove Ads
  Reply With Quote
Old 07-04-2013, 06:08 PM   #4
jct842   jct842 is offline
 
Join Date: Jul 2008
Location: way up north in arkansas
Posts: 99
It sure does not seem like you have the full battery voltage on the starter, some where there has to be resistance between the battery and the starter motor. Bad ground, bad connection, partialy broken wire under the insulation/ Even the solenoid can have high resistance in its contact points./ could try jumping the two large connectors on the solenoid with a pliers to see if then the motor turns over at the correct speed.
__________________
1983 Yamaha Riva 180cc
2007 Yamaha Majesty 400cc
  Reply With Quote
Old 07-05-2013, 09:55 PM   #5
DW   DW is offline
 
DW's Avatar
 
Join Date: Mar 2013
Location: Spokane Valley WA
Posts: 41
Make sure you get the same voltage reading at the solenoid and starter connections as you do at the battery. Must be 12volts or better.



Login or Register to Remove Ads
  Reply With Quote
Old 07-07-2013, 08:40 AM   #6
oldkid   oldkid is offline
 
Join Date: Mar 2013
Location: Tennessee
Posts: 35
You have to check the battery voltage under load. A fully charged battery should 12.8 volts when charged and only drop down to 11.5 when cranking. A bad battery can show over 12 volts when not under load and drop to almost nothing when cranking.
  Reply With Quote
Old 07-07-2013, 11:33 PM   #7
scott M   scott M is offline
 
Join Date: Jul 2013
Posts: 3
battery is fine it reads 12.7 and the reading at the solinoid is the same. could it be a problem with compression. is that why its not turning over?
  Reply With Quote
Old 07-08-2013, 12:51 AM   #8
DW   DW is offline
 
DW's Avatar
 
Join Date: Mar 2013
Location: Spokane Valley WA
Posts: 41
pull the spark plug and see how easy it turns
  Reply With Quote
Reply

Tags
150, 150cc, vento phantom

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:53 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.