Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 50cc - 124cc
Reply
 
Thread Tools Search this Thread Display Modes
Old 09-08-2016, 05:48 PM   #1
linkkokiri83   linkkokiri83 is offline
 
Join Date: Jul 2016
Posts: 18
Impact wrench

For what i know, clutch, (both the outer and inside 41mm nut), variator and back tire is all that needs an impact wrench to remove and tighten.

So air powered, ebay, what would be able to do those ?
__________________
Smm jazzie gy6 , from 50 to 100cc
Orange black cdi cable
Purple racing cdi box
20mm carb jets unknown as of now
Open element air filter
Mirror stereo system
Roller weight nd clutch spring unkown
Rider 6 foot 270 pounds



Login or Register to Remove Ads
  Reply With Quote
Old 09-09-2016, 07:22 AM   #2
rks   rks is offline
 
rks's Avatar
 
Join Date: Dec 2013
Location: Western New York
Posts: 454
A lot of other scoot owners have had good results with one like this..http://www.harborfreight.com/12-volt...nch-92349.html

If the description is accurate, it is powerful enough to strip any fastener on your scooter, so I would go easy when using one.

I use an air powered impact, mainly because I have the system left over from my working years, and the fact that I still have 11 vehicles to maintain....from the scooter to a diesel powered utility tractor. If I had only a scooter and a car....I'd probably have something like the one I linked.
__________________
2011 Jonway 150cc..16,109 breakdown free miles, and counting

  Reply With Quote
Old 09-09-2016, 07:57 AM   #3
blueboy5000   blueboy5000 is offline
 
blueboy5000's Avatar
 
Join Date: Jul 2011
Location: Connecticut
Posts: 493
That's a great choice. Spend the 7 extra bucks to get the warranty on it. Then even if you ruin it, they'll replace it. Just r we remember to pay the warranty on the replacement.
__________________
2011 Roketa MC-23-150

4T 150cc 157 qmj

24mm carb w 115 main jet and paper cone air filter

Manual petcock w Tygon fuel lines

Scrappy Dog Scooters Retro-slash stainless straight-thru exhaust

RED spring clutch

Adjustable CDI (brand unknown, it's blue and red and works great!)

KOSO high performance variator w 12g sliders

Gates Powerlink 835-20-30 belt

GPS verified 65mph on flats.



Login or Register to Remove Ads
  Reply With Quote
Old 09-09-2016, 08:00 AM   #4
blueboy5000   blueboy5000 is offline
 
blueboy5000's Avatar
 
Join Date: Jul 2011
Location: Connecticut
Posts: 493
I use a 12" c-wrench and the ground to get that large clutch nut. It's a hell of a lot easier and cheaper than buying a 3/4" drive impact and a 42mm socket.
__________________
2011 Roketa MC-23-150

4T 150cc 157 qmj

24mm carb w 115 main jet and paper cone air filter

Manual petcock w Tygon fuel lines

Scrappy Dog Scooters Retro-slash stainless straight-thru exhaust

RED spring clutch

Adjustable CDI (brand unknown, it's blue and red and works great!)

KOSO high performance variator w 12g sliders

Gates Powerlink 835-20-30 belt

GPS verified 65mph on flats.
  Reply With Quote
Old 09-09-2016, 07:34 PM   #5
wheelbender6   wheelbender6 is offline
 
wheelbender6's Avatar
 
Join Date: Mar 2010
Location: Houston area
Posts: 945
Anybody use one of those impact wrenches that you hit with a hammer to work on the CVT? I use one on the engine case screws but have not tried it on the CVT parts.
__________________
"Beer never broke my heart" - Luke Combs



Login or Register to Remove Ads
  Reply With Quote
Old 09-10-2016, 07:35 AM   #6
rks   rks is offline
 
rks's Avatar
 
Join Date: Dec 2013
Location: Western New York
Posts: 454
Quote:
Originally Posted by blueboy5000 View Post
I use a 12" c-wrench and the ground to get that large clutch nut. It's a hell of a lot easier and cheaper than buying a 3/4" drive impact and a 42mm socket.
You can get something like this, http://www.harborfreight.com/3-pc-im...set-61991.html, rather than a 3/4" drive impact. Of course, you still have to have the large socket.
__________________
2011 Jonway 150cc..16,109 breakdown free miles, and counting

  Reply With Quote
Old 09-10-2016, 07:56 PM   #7
linkkokiri83   linkkokiri83 is offline
 
Join Date: Jul 2016
Posts: 18
Got a tradespro 24volt 1/2 inch wrench. Works fine. Got the 3/4 and 3/8 adaptors and a 41 mm socket. No issues aside from battery not having an auto shutoff. 40$ for the wrench off ebae
__________________
Smm jazzie gy6 , from 50 to 100cc
Orange black cdi cable
Purple racing cdi box
20mm carb jets unknown as of now
Open element air filter
Mirror stereo system
Roller weight nd clutch spring unkown
Rider 6 foot 270 pounds
  Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:50 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.