83cc backfiring/hesitation @low speed

AMSkait · 02-28-2017, 02:48 PM

My scoot is backfiring on throttle not off from a stop to about 5mph then it runs normal. I have not changed any carb settings since or mods and it ran great for hundreds of miles now its doing this. I do have the orange cdi and plug wire on it...maybe the cdi is going bad. If anyone has any ideas, please let me know. Thanks

Sigrider · 03-21-2017, 08:14 PM

Please inform what exactly your bike is. That will help us help you.

AMSkait · 03-22-2017, 03:57 AM

2011 Kaitong Kait...gy6 49cc with 50mm big bore. Thanks for the reply.

wheelbender6 · 03-23-2017, 08:56 PM

Sounds like you are running lean. I would run a few tanks treated with Seafoam before pulling the carb apart for cleaning.

AMSkait · 03-24-2017, 04:42 AM

The carbs brand new, up- jetted, pod filter intake, exhaust, variator, clutch, a9 cam, blablabla. I went to tinker with it few days ago and battery just dead...charged it and barely turned over. Tested it and its gone. Picking up new one today, will see how it runs, richen low speed if needed, clean carb, change all orange cdi n plug wire/coil, new ngk plug. After that it could be a wiring/short issue i dunno.

Sigrider · 03-24-2017, 12:23 PM

consider upjetting the pilot jet a size?

AMSkait · 03-25-2017, 01:52 AM

I would, but it ran fine before so maybe just clogged carb. Got a new battery...now I can begin going over everything I guess. Prob just something simple...I hope lol

Sigrider · 03-25-2017, 02:17 PM

Ran fine before the mods? Or before you went to tinker?

AMSkait · 03-25-2017, 11:39 PM

Ran fine before and after. Didn't get to mess with it. Battery dead. New battery good to go but had a few things to do today, so didn't have time. Just have to wait on the weather.

Sigrider · 03-26-2017, 10:17 AM

If you bigbore a engine it's not just going to need more fuel at WOT it's going to need more everywhere. Try going up a size on the pilot.

AMSkait · 03-29-2017, 07:18 PM

Starter is barely turning engine over. Battery voltage normal, cleaned all grounds, checked fuses. No idea other than a bad starter or a short somewhere. So I cant start it to see how it runs now

Sigrider · 03-30-2017, 09:18 AM

Put a jump pack to it for now to get a few extra bolts. Your engine is struggling to turn over because the starter wires are inadequate for your upgraded engine size. Very common problem. Get some fatter gauge wires running to and from the starter, and that'll help the weak starter

AMSkait · 04-01-2017, 07:53 PM

Bridged the starter relay/solenoid and starter turned normal! Just going to order relay.. and positive wire at battery got warm real quick while holding starter button...was told that means starter is bad(2 much current draw) dunno we see.

03-23-2017, 08:56 PM	#4
wheelbender6 Join Date: Mar 2010 Location: Houston area Posts: 945	Sounds like you are running lean. I would run a few tanks treated with Seafoam before pulling the carb apart for cleaning. __________________ "Beer never broke my heart" - Luke Combs
	0

03-30-2017, 09:18 AM	#12
Sigrider Join Date: Mar 2017 Location: Westerly RI Posts: 32	Put a jump pack to it for now to get a few extra bolts. Your engine is struggling to turn over because the starter wires are inadequate for your upgraded engine size. Very common problem. Get some fatter gauge wires running to and from the starter, and that'll help the weak starter __________________ 2005 eton Beamer 2: -tecnigas next r -90 vs 80 main -derestricted -ported -4g stage 6 rollers -8 inch light bar -rider mod; Balls; 140lbs Don't ride faster than your angel can fly. He's a sore loser.
	0

03-21-2017, 08:14 PM	#2
Sigrider Join Date: Mar 2017 Location: Westerly RI Posts: 32	Please inform what exactly your bike is. That will help us help you.
	0

03-24-2017, 12:23 PM	#6
Sigrider Join Date: Mar 2017 Location: Westerly RI Posts: 32	consider upjetting the pilot jet a size?
	0

03-25-2017, 01:52 AM	#7
AMSkait Join Date: Feb 2017 Location: Louisville, Ky. Posts: 12	I would, but it ran fine before so maybe just clogged carb. Got a new battery...now I can begin going over everything I guess. Prob just something simple...I hope lol
	0

03-25-2017, 02:17 PM	#8
Sigrider Join Date: Mar 2017 Location: Westerly RI Posts: 32	Ran fine before the mods? Or before you went to tinker?
	0

03-25-2017, 11:39 PM	#9
AMSkait Join Date: Feb 2017 Location: Louisville, Ky. Posts: 12	Ran fine before and after. Didn't get to mess with it. Battery dead. New battery good to go but had a few things to do today, so didn't have time. Just have to wait on the weather.
	0

03-26-2017, 10:17 AM	#10
Sigrider Join Date: Mar 2017 Location: Westerly RI Posts: 32	If you bigbore a engine it's not just going to need more fuel at WOT it's going to need more everywhere. Try going up a size on the pilot.
	0

03-29-2017, 07:18 PM	#11
AMSkait Join Date: Feb 2017 Location: Louisville, Ky. Posts: 12	Starter is barely turning engine over. Battery voltage normal, cleaned all grounds, checked fuses. No idea other than a bad starter or a short somewhere. So I cant start it to see how it runs now
	0

04-01-2017, 07:53 PM	#13
AMSkait Join Date: Feb 2017 Location: Louisville, Ky. Posts: 12	Bridged the starter relay/solenoid and starter turned normal! Just going to order relay.. and positive wire at battery got warm real quick while holding starter button...was told that means starter is bad(2 much current draw) dunno we see.
	0