Connecting headlights to ignition?

iamteeg · 08-13-2014, 05:32 PM

You should be able to ground to any ground cable or directly to the engine or transmission, and connect the positive cable splicing the ignition. Shouldn't be too difficult.

I do have some starting issues occasionally with my 2009 gy6(150), so I usually start w/o headlights and let it warm up a couple minutes (giving it some throttle) and then turn them on before I start moving... So IDK if you want to wire them directly to the ignition; I suppose you don't have the same problem as I do.

08-13-2014, 05:32 PM	#2
iamteeg Join Date: Aug 2014 Location: Philadelphia, PA Posts: 16	You should be able to ground to any ground cable or directly to the engine or transmission, and connect the positive cable splicing the ignition. Shouldn't be too difficult. I do have some starting issues occasionally with my 2009 gy6(150), so I usually start w/o headlights and let it warm up a couple minutes (giving it some throttle) and then turn them on before I start moving... So IDK if you want to wire them directly to the ignition; I suppose you don't have the same problem as I do. __________________ 2009 Baja SC150, 3xxx miles. Conical aftermarket air filter. Spark Plug: NGK C7HSA (0.030") Oil: Mobil1 4T 10w40
	0