|
11-04-2014, 03:52 PM | #1 |
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
|
performance clutch bell
I bought a performance clutch from scrappy dog and didn't see a difference so today I bought one of there performance clutch bells maybe ill have better luck.it seems the performance clutch was tight in the bell but the strang thing is I put my old springs in the new clutch and it performed like a stock clutch.i don't think there is a difference in the clutch itself I guess its all in the springs .I also bought a 1500rpm clutch and 1500 rpms torque spring.with my performance variator and the new sliders I should see some improvements
|
11-07-2014, 12:57 AM | #2 |
Join Date: Mar 2013
Location: Vancouver, BC
Posts: 198
|
If the clutch bell is tight over the pads it's the wrong size. Make sure you got a 107mm clutch bell.
__________________
2005 Yamaha BWS (Zuma) "Garfield" TP Black Trophy 70cc, Giannelli Reverse Pipe, 5g Dr. Pulley Sliders, Delta Clutch with Yellow Springs and Yellow Contra, Malossi Torque Controller, Naraku R-Vent Bell, NCY Adjustable Secondary Sliding Sheave, CF Reeds, Kege Analog Tach, Dual Headlight Mod, N.A. Rear Fender Delete, OEM Short Windshield. |
|
|